Functions Developer (Embedded c - Algorithm / Driving Functions)

Job Title: Embedded Firmware Engineer (RF Focus)

Location: Gurgaon, Haryana (On -site)

Employment Type: Full-Time

Experience: 3-5 years

We’re hiring an Embedded Firmware Engineer (3–5 yrs) with strong experience in Sub-GHz RF, LoRa/LoRaWAN, and IoT systems. The role focuses on firmware development, RF communication, and secure telemetry.

About Aaizel Tech

Aaizel Tech is a pioneering tech startup at the intersection of cybersecurity, AI, geospatial solutions, and more. We drive innovation by delivering transformative technology solutions across industries. As part of our dynamic team, you'll gain hands-on experience and learn from experts who are dedicated to pushing the boundaries of what's possible.

Responsibilities

• Develop firmware for STM32 (WL/H/L/F series)

• Design & implement Sub-GHz RF (403/433/868/915 MHz) systems

• Work on LoRa PHY/MAC & LoRaWAN stack (OTAA/ABP, uplink/downlink)

• Perform RF testing & debugging (RSSI, SNR, range testing, SDR/spectrum tools)

• Implement secure communication (AES-128/256, CRC/SHA)

• Develop drivers: UART, SPI, I2C, ADC, DMA

• Work with FreeRTOS (tasks, queues, ISRs, low power)

• Build communication stacks: RS485/Modbus, RS232, MQTT, TCP/IP, UDP

• Implement bootloader & OTA updates

• Debug using SWD/JTAG, logic analyzer, DSO

• Optimize for performance, power, and RF reliability

Requirements

• 3–5 years in embedded firmware + RF systems

• Strong in Embedded C, STM32CubeIDE, HAL/LL

• Hands-on with LoRa/LoRaWAN & Sub-GHz communication

• Understanding of RF fundamentals (link budget, interference, antennas)

• Experience in secure communication (AES)

• Good knowledge of FreeRTOS & industrial protocols (RS485/Modbus)

• Strong debugging skills (firmware + RF)

• Basic hardware/RF PCB understanding

Good to Have

• Experience with ChirpStack / TTN

• Knowledge of FSK/GFSK

• RF certification exposure (CE/FCC/ETSI)

How to Apply

• Please submit your resume, portfolio, and a cover letter outlining your relevant experience and how you can contribute to Aaizel Tech’s success.

JD For Embedded C Engineer requirements :

Mandatory Skillsets are as below :

1. Embedded SW development background

2. Embedded C/C++/

3. Hands-on experience in RTOS Programming.

4. Working knowledge of SDLC and methodologies/tools for requirement management.

5. Experience working in an agile development environment.

FURIOUS FOX is looking for Embedded Developers with strong coding skills in C & C++ as well as experience with Embedded Linux.

Experience : (Minimum 7-10 yrs)

• Experienced in edge processing for connected building / industrial / consumer

appliances / automotive ECU

• Have a good understanding of IoT platforms and architecture

• Deep experience in operating systems eg: Linux, freeRTOS / kernel development/device drivers.

/ sensor drivers

• Have experience with various low-level communication protocols, memory devices, messaging

framework etc.

• Have a deep understanding of design principles, design patterns, container preparations

• Have developed hardware, OS abstraction layers, and sensor handlers services to manage various BSP, os standards

• Have experience with Python edge packages.

• Have a good understanding about IoT databases for edge computing

• Good understanding of connectivity application protocols and connectivity SDK for Wi-Fi and BT / BLE

• Experienced in arm architecture, peripheral devices and hardware board configurations

• Able to set up debuggers, configure build environments, and compilers and optimize code and performance.

Skills / Tools:

• Expert at object-oriented programming

• Modular programming

• C / C++ / JavaScript / Python

• Eclipse framework

• Target deployment techniques

• IoT framework

• Test framework

Highlights :

• Having AI / ML knowledge in applications

• Have worked on wireless protocols

• Ethernet / Wi-Fi / Bluetooth / BLE

• Highly exploratory attitude

• willing to venture in and learn new

technologies.

• Have done passionate projects based on self-interest.

Skill Required

          Technical

• ●  The suitable candidate shall have most of the following knowledge /skills/experience:

• ●  Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware

• Design Life Cycle.

• ●  Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).

• ●  Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.

• ●  Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.

• ●  Circuit building and Circuit Analysis Skills.

• ●  Component Data Sheet analysis skills.

• ●  Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).

• ●  Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).

• ●  Knowledge about Board Bring Up process.

• ●  Testing (Integration testing, protocol/Driver testing, etc.).

• ●  Experience in Embedded C programming and embedded system integration and can develop test cases for the same.

• ●  Knowledge of IoT Open Source Programming / Development.

• ●  Candidate will be responsible for research & development of M2M/IoT products.

• ●  Candidate will be responsible for end-to-end embedded system integration.

   

• Others

  Abilities on the following shall be of added advantage:

• ●  Component Procurement

• ●  Vendor Interaction

• ●  Tools Management

• ●  Costing and resource estimation

• ●  Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative

•  

• Decision level
  Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending Machines

  Demonstrate (Key competencies)

  Healthy knowledge of most of the following:

• ●  Embedded C

• ●  8/16 bit Microcontrollers

• ●  Atmel Studio/ Arduino IDE

• ●  Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)

• ●  Hands-on experience on Test equipment and solder stations (SMD/DIP)

• ●  M2M / IoT based development

StartUp engaged in inventing and innovating Smart Energy Meters and related Technologies (OEM) requires Embedded Engineers. Following re-innovation principle and Technology First direction, we design Technologies to deliver our Vision of the highest Quality Products and Technologies. The candidate's responsibilities include IoT (COSEM/DLMS), technology integration. Required skills include Embedded C and C++ and knowledge of Electrical and Electronics.

• Hands-on embedded C skills (mandatory)
• Experience with any microcontrollers MCU (mandatory) – Renesas/ Infineon/ Cypress/ ST-Micro /TI / Microchip
• Experience with any of peripherals & communication protocols usage in application development (mandatory) – UART, I2C, SPI, I2S, CAN, USB, ADC, DAC, EEPROM, Flash memory
• Experience with any RTOS – FreeRTOS, Azure RTOS, ThreadX
• Experience with any networking &  connectivity modules (preferred & added advantage) – Ethernet, WiFi, BLE, MQTT, COAP

• Works towards developing Stable & Efficient Firmwares for Embedded
• Responsible for developing Firmware which are Stable, Efficient and scalable.
• Responsible to create coherent and scalable architecture designs.
• Responsible for understanding and utilizing best BLE / IOT
• Responsible for understanding various RTOS design principles.
• Qualification: B.E. / B.Tech / M.C.A. in Computer Sciences.
• Must Proficient in Embedded C, C++, BLE, Zephyr RTOS, nRF.
• Ready to work from home.
• Should have above 4 years of experience.

• Very strong knowledge in Embedded C including
• Data structures
• Function pointers
• Bitwise operations
• Experience with Finite State Machine (FSM) software design
• Required experience in AVR microcontrollers and projects to demonstrate it
• Familiarity with ARM 32 bit microcontrollers (Cortex M or any other)
• Required experience with common communication protocols like SPI, UART, I2C etc.
• Comfortable with reading datasheets and basic hardware schematics
• Comfortable with linux development environment including the use of GCC, gdb, makefile

Soft Skills

• Good communication skills
• Self-driven
• Passion for embedded engineering