Embedded Systems and Electronics Engineer

Roles and Responsibilities:

• Strong experience with programming microcontrollers like Arduino, ESP32, and ESP8266.
• Experience with Embedded C/C++.
• Experience with Raspberry Pi, Python, and OpenCV.
• Experience with Low power Devices would be preferred
• Knowledge about communication protocols (UART, I2C, etc.)
• Experience with Wi-Fi, LoRa, GSM, M2M, SImcom, and Quactel Modules.
• Experience with 3d modeling (preferred).
• Experience with 3d printers (preferred).
• Experience with Hardware design and knowledge of basic electronics.
• Experience with   Software will be preferred.ss

Detailed Job role (daily basis) done by the IOT developer.

·       Design hardware that meets the needs of the application.

·       Support for current hardware, testing, and bug-fixing.

·       Create, maintain, and document microcontroller code.

·       prototyping, testing, and soldering

·       Making 3D/CAD models for PCBs.

Skill Required

          Technical

• ●  The suitable candidate shall have most of the following knowledge /skills/experience:

• ●  Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware

• Design Life Cycle.

• ●  Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).

• ●  Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.

• ●  Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.

• ●  Circuit building and Circuit Analysis Skills.

• ●  Component Data Sheet analysis skills.

• ●  Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).

• ●  Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).

• ●  Knowledge about Board Bring Up process.

• ●  Testing (Integration testing, protocol/Driver testing, etc.).

• ●  Experience in Embedded C programming and embedded system integration and can develop test cases for the same.

• ●  Knowledge of IoT Open Source Programming / Development.

• ●  Candidate will be responsible for research & development of M2M/IoT products.

• ●  Candidate will be responsible for end-to-end embedded system integration.

   

• Others

  Abilities on the following shall be of added advantage:

• ●  Component Procurement

• ●  Vendor Interaction

• ●  Tools Management

• ●  Costing and resource estimation

• ●  Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative

•  

• Decision level
  Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending Machines

  Demonstrate (Key competencies)

  Healthy knowledge of most of the following:

• ●  Embedded C

• ●  8/16 bit Microcontrollers

• ●  Atmel Studio/ Arduino IDE

• ●  Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)

• ●  Hands-on experience on Test equipment and solder stations (SMD/DIP)

• ●  M2M / IoT based development