About Us
We are a fast-growing deep-tech startup building next-generation embedded products from the ground up. We move fast, prototype aggressively, and take ideas from whiteboard to production.
If you enjoy solving real-world hardware challenges, writing tight firmware, bringing up boards, and seeing your design go into mass production, you’ll love it here.
Key Responsibilities
- Design and develop embedded hardware systems based on microcontrollers and SoCs
- Develop, test, and optimize embedded firmware in C/C++
- Perform schematic design, component selection, PCB review, and board bring-up
- Develop low-level drivers for peripherals (UART, SPI, I2C, CAN, USB, Ethernet, etc.)
- Debug hardware/firmware issues using oscilloscopes, logic analyzers, and debuggers
- Collaborate with cross-functional teams (mechanical, testing, manufacturing)
- Support product validation, compliance testing, and production release
- Prepare technical documentation and design reports
- Collaborate directly with founders and product teams
- Take products from prototype to manufacturing
You won’t just “contribute.” You’ll own modules and ship products.
Required Skills & Qualifications
- 4–8 years of hands-on experience in embedded systems
- Strong embedded C/C++ skills
- Experience with microprocessors/microcontrollers, SOCs’
- Experience in power supply designs, analog and digital interfaces.
- Experience in schematic design & PCB review
- Strong debugging skills using oscilloscopes, logic analyzers, and JTAG
- Deep understanding of communication protocols (SPI, I2C, UART, CAN, Bluetooth, WiFi, etc.)
You should be comfortable moving between hardware and firmware without hesitation.
Good to Have (But Not Mandatory)
- FPGA development (Verilog/VHDL)
- Experience with Xilinx/Intel FPGA tools
- High-speed digital design exposure
- Embedded Linux experience
- EMI/EMC awareness
Educational Qualification
- B.E./B.Tech/M.E./M.Tech in Electronics, Electrical, and Embedded Systems.
Who Will Thrive Here
- Builders who like solving messy real-world problems
- Engineers who take ownership instead of waiting for instructions
- People who enjoy fast iterations and tight deadlines
- Those who prefer impact over hierarchy
Why Join Us
- Work on cutting-edge embedded products
- High ownership & decision-making power
- Fast learning curve
- Direct impact on product architecture
Shubham Vishwakarma
Full Stack Developer - Averlon
About Techsophy Information Solutions Private Limited
About
Company social profiles
Similar jobs
Role: Powertrain Diagnostics Engineer
Location: Bengaluru
Experience: 3-5 years
About company:
Requisimus is an IT consulting and service organization headquartered in Germany. With over 25 years of expertise and global presence, we are committed to customer excellence and focused in addressing niche areas of product engineering, process consulting and software development in automotive, railways, production automation, data management and business IT domains. Requisimus, India incubated since 2023, is focused to provided consulting and services for embedded product development and software solutions.
Job Summary:
The Powertrain Diagnostic Trouble Codes (DTC) Specialist having responsibilities for developing and managing the diagnostic trouble codes for powertrain systems. This role involves collaboration with cross-functional teams to ensure on-time delivery of diagnostic solutions that meet quality and regulatory standards.
Key Responsibilities:
- DTC Development and Management:
- Experience in Diagnostics and Fault Management
- Developing powertrain diagnostic strategies and DTCs, understanding of DTC Structure.
- Ensure that diagnostic systems meet OBD I and II (On-Board Diagnostics) standards.
- Maintain and update the DTC related Documents as new systems are developed and existing
- systems are modified.
- Knowledge of ISO14229.
- Experienced programming with C/C++
Collaboration and Communication with Testing and Validation Team:
- Working closely with the validation and vehicle testing teams for resolving reported issues to improve overall vehicle performance.
- Based on testing & validate feedback: Analyzing, Diagnosing, Debugging and troubleshooting reported software issues, providing effective solutions.
- Coordinate with software developers to ensure seamless operation and accurate reporting of DTCs.
- Perform root cause analysis for diagnostic emissions and drivability cases.
Documentation and Reporting:
- Prepare comprehensive documentation for diagnostic algorithms and code functionalities.
- Report on the performance and accuracy of diagnostic systems
Support and Training:
- Provide technical support to internal teams and external customers regarding diagnostic
- systems.
- Develop training materials and conduct training sessions
CInternship Opportunity – Embedded Systems & IoT
Join our hands-on internship program designed for engineering students passionate about core tech. You'll work on real-time projects involving microcontrollers, sensors, RTOS, circuit design, and IoT protocols.
Gain exposure to AI-integrated embedded applications and build a strong project portfolio with mentorship and placement support.
Location: Bangalore (Hybrid/On-site)
Duration: 2–3 months
Eligibility: Final-year students and pre final year (ECE/EEE/CSE/Mechatronics)
#EmbeddedSystems #IoTInternship #EngineeringInternship #CoreTechCareers #Microcontrollers #RTOS #PCBDesign #IoTProjects #KnowxInnovations #AIoT #TechInternship #SkillDevelopment #HandsOnLearning #BangaloreInternship #StudentInternship
ExpressPosition: Senior Hardware Engineer
Requirement: Immediate joining
Job Description for the above position:
➢ 5 to 7 years of experience in high-speed and Mixed-signal product design and development.
➢ Hands-on experience in circuit design and circuit simulation, an excellent skill set is a must in circuit analysis.
➢ Experience in Industrial/MIL grade environmental system design, in which processor-controlled and FPGA-controlled devices are involved.
➢ Excellent component selection and decision-making skills.
➢ Working experience with high-speed digital interfaces such as PCI Express, DDR3/4 SDRAM, 100Mbps/1000Mbps/10Gb Ethernet, Battery management system and USB2.0/3.0. This is must
Requirement.
➢ Experience in a range of technologies including digital, analog and power electronics.
➢ Hands-on experience in writing low-level design documents, architectural design documents and test procedures is a must to apply for this position.
➢ Excellent knowledge of electronic circuits and analysis.
➢ Familiarity and Experience with Altium Designer and Allegro tools.
➢ The ability to work with software engineers to design and debug systems.
➢ Experience in Thermal analysis, Load analysis and Timing analysis.
➢ Knowledge of Signal integrity and power integrity.
➢ Experience in system-level design, logical design etc.
➢ Experience and involvement in the complete cycle of Product development and design skill is a must requirement for this position.
➢ Good knowledge of EMI/EMC testing procedures and Certification standards.
➢ Guide and support all aspects of PCB layout, fabrication, and assembly processes.
➢ Knowledge of analog and digital video interfaces, especially HDMI, Display Port, and SMPTE
video standards a plus.
➢ Hands-on experience in design/troubleshooting/updating hardware.
➢ Thorough knowledge of MS Office applications, Word, Excel, and Visio.
➢ Mentoring the team, being an individual contributor, willingness to take ownership of the design is a must to apply for this position.
➢ Experience with testing tools like Oscilloscopes, Signal Analyzers etc...
➢ Strong knowledge on layer stack-up build.
Qualification:
➢ BE/B. Tec or ME/M. Tech in Electronics/Electronics and communication Person
Specification/Competencies:
➢ Self-motivated
➢ The ability to work independently, within or lead the team.
➢ Well organized
➢ Strategic thinker.
➢ Proactive
➢ Ability to manage multiple tasks and work toward long-term goals.
➢ Excellent communication skills (verbal and written)
➢ Solid understanding of engineering fundamentals and technical problem-solving skills.
➢ Experience in establishing and sustaining strong relationships with the extended team.
Primary skills:
At least 3+ years of working experience on embedded firmware development
- Experience in multithreaded programming, network programming (wired and wireless protocols), real-time programming, cross-platform and cross-language development
- Hands-on experience on driver development for various sensors
- Working knowledge of communication protocols like UART, I2C, SPI, USB, Ethernet, etc
- Product development experience with range of microcontroller/microprocessor architectures, adoption of bare-metal, RTOS and Linux operating systems on new platforms
-Hands-on experience on software development in Bluetooth domain is added advantage
- Experience with hardware lab equipment such as digital scope, logic analyser and JTAG
- Understanding of embedded development constraints and system performance
- Experience with programming in C/C++ and Embedded C
About Apexon:
Apexon is a digital-first technology services firm specializing in accelerating business transformation and delivering human-centric digital experiences. For over 17 years, Apexon has been meeting customers wherever they are in the digital lifecycle and helping them outperform their competition through speed and innovation. Our reputation is built on a comprehensive suite of engineering services, a dedication to solving our clients’ toughest technology problems, and a commitment to continuous improvement. We focus on three broad areas of digital services: User Experience (UI/UX, Commerce); Engineering (QE/Automation, Cloud, Product/Platform); and Data (Foundation, Analytics, and AI/ML), and have deep expertise in BFSI, healthcare, and life sciences.
Apexon is backed by Goldman Sachs Asset Management and Everstone Capital.
To know more about us please visit: https://www.apexon.com/" target="_blank">https://www.apexon.com/
Desired Candidate profile:
- 5+ years of Embedded/Linux SW Development relevant Experience in Embedded C++.
- Expert knowledge in writing software for embedded Systems (Embedded C++ language).
- Experience on OTA would be an added advantage
- Work experience in software development on bare metal, RTOS or Internal Linux.
- Work experience in developing firmware for 8/16/32 bit microcontrollers (ARM, RISC etc)
- Good understanding w.r.t usage of 1. RTOS like MQX.
- Bootloader and software update concepts.
- Communication protocols like TCP/IP,MQTT.
- Socket programming in Linux environment.
- Good knowledge on protocols like (RS485, SPI, I2C, ADCs, CAN, LIN)
- Knowledge of Blue-tooth communication protocols for BLE 4.2/5.1.
- Proficient in the use of embedded SW Development tool chain (Flash/ debug tool chain, IDE).
- Version Control Systems –GIT
- Should have detailed knowledge on microcontrollers/microprocessors
- Experience in scripting languages like Shell / CAPL / Make/Python etc.
- Experience in using tools like Logiscope / Function Generator / Oscilloscope, etc.
- Good knowledge in reading schematics and datasheets.
- Excellent analytical skills and problem-solving skills.
- Strong communication and interpersonal skills.
- Must be a self-starter.
- Ability to work as part of a dedicated project team and independently
CC++Location : Hyderabad
Qualifications: BE/BTECH from EE/EC
Experience : 3-5 Years
Desired Candidate Profile:
-Development of Embedded device drivers, Ethernet, USB, SPI.
-Able to read data sheets.
-Good debug skills.
-Board bring up skill.
-Worked on application processor type boards( T2080/2081 etc. )
-Strong in embedded C
-Proficient in board bring up and device drivers is needed.
-System programming and building multi-platform SDK on Linux or other OS is desirable.
-Onsite system integration.
-Should have hands on debugging experience.
-Candidate is expected to have strong knowledge of C and C++.
-Understanding and experience using structured programming techniques.
Job Type: Full-time
Salary: ₹300,000.00 - ₹700,000.00 per year
Schedule:
Morning shift
Ability to commute/relocate:
hyderabad, Hyderabad - 500003, Telangana: Reliably commute or planning to relocate before starting work (Required)
Experience:
total work: 3 years (Preferred)
C++You would be part of:
- Designing/Improvement of new/existing architectures of distributed computing with subcomponents of Unmanned Aerial Systems (UAS).
- Working/Researching with industrial state of the art sensor systems and modules, and developing drivers (HAL or wrapper) and applications around their usage.
- Design and implementation of communication protocols between different subcomponents of UAS for distributed computing.
- Writing Applications and Drivers from the scratch for (embedded)linux based systems.
- Scripting and automations around work flows of UAS usage.
- Working with existing sophisticated software stacks of subcomponents of UASs.
- Working closely with electronics, design and systems teams for architecture development and deployment.
- Working closely with Flight Controller engineers to do collaborative development of UAVs.
We expect you to be:
- Experienced in hands-on development of complex embedded systems involving multiple microcontrollers or SoCs.
- Very good in analytical abilities to be able to do core research and development activities.
- Able to write low level drivers (wrapper or core) from the scratch.
- Very comfortable reading and understanding datasheets and reference manuals of microcontrollers, peripherals, sensors etc.
- Able to understand existing complex embedded software stack written in C/C++.
- Solid in C.
- Good in C++.
- Comfortable with using hardware debuggers.
- Having Hands-On experience with RTOS concepts like scheduling, threads synchronicity , race conditions etc.
- Having Solid understanding of interrupt mechanisms.
- Experienced in working with different hardware protocols like SPI, I2C, UART, PWM, CAN, USB etc.
- Having Solid understanding of interrupts architecture of ARM based microcontrollers like STM32, LPC etc.
- Having Good understanding of the concept of bootloaders.
- Able to multitask.
- A self-motivated and motivating personality who can work well independently as well as part of a team
- Having good interpersonal and soft skills who can adapt to the work environment while manifesting a good positive attitude
You are awesome if you are:
- Experienced in Linux Device Driver development.
- Having good exposure of working on and understanding of any sensor modules like GPS, LIDAR etc.
- Experienced in data filtering techniques (Example: Kalman filter)
C++CSummary:
The embedded systems engineer designs, develops, tests, and maintains embedded systems. The engineer will identify and fix issues and work collaboratively with engineers, product managers, and others on various teams.
Responsibilities:
- Design and build embedded systems, including embedded system firmware
- Test and debug the systems
- Monitor and maintain the system after development
- Improve system efficiency and stability after development
- Collaborate with customers to create systems based on their needs
Requirements:
- Minimum of a bachelor's degree in computer science or engineering
- Professional experience in embedded systems
- Significant programming experience in C or C++
- Experience in trouble-shooting embedded systems and microcontroller peripherals
- Experience in working in real-time operating systems
- Experience in interfaces, IP protocols, and hardware subsystems
- Proficiency in working with common embedded systems communication protocols
- Strong interpersonal and writing skills
- Ability to work as part of a team
- Exceptional analytical and problem-solving skills
- Self-motivated and passionate about your work and embedded systems
- Always eager to learn and improve
CDo you wish to work for a Deep-tech Indian company developing path-breaking products which are set to disrupt every possible industry and domain?
Our client is building a scalable, cloud-controlled, and rare-earth free platform for designing, building, and deploying electric motors for various applications. It aims towards building transformative technology that will make the motors of the future simpler, smarter, more efficient, and easy-to-build in the long run.
The founders are veteran serial entrepreneurs, product experts, and motor technologists with more than eight decades of experience developing cutting-edge products and technologies. The company is bringing transformative motor technology to the forefront of commercial applications. The company aims to make deep fissures in the extant hydrocarbon and rare-earth-based energy economy to create a greener future.
What you need to join us
Are you a coding ninja, algorithmic genius, with a flair for control systems and a passion to create new path breaking technologies (with a green social impact to boot!)? Does working with a bleeding edge research oriented tech startup excite you? If so, please read on and apply.
Responsibilities
- Take ownership of firmware development for motor controllers
- Identify and develop real-time algorithms for controlling cutting-edge Motors and Generators
- Implement motor control algorithms in microcontrollers
- Debug and diagnose the firmware on the controller hardware
- Develop drivers and HAL firmware as needed for various peripherals
Skills and Experience
- Experience in embedded Firmware development
- In-depth knowledge of C programming knowledge
- Extensive engineering experiences in software development with proven track record of at least one product from concept to production
- Hands on experience with development and debugging of embedded systems
- Experience in working with real-time embedded systems and power electronics
- Experience in working with Microcontroller peripherals such as ADC, Timers, Comparators, Input-capture, PWM etc.
- Experience with microcontrollers from TI, NXP, STM32, PIC, Atmel (ARM based microcontroller experience is preferred)
- Ability to translate mathematical concepts to executable code in resource-constrained microcontroller environments
- Exposure to debugging using lab equipment such as Oscilloscopes, Multimeters, Logic Analyzers, signal generators etc.
- Hands-on experience in bringing up a new hardware with firmware written from scratch
- Experience with simulation software such as Matlab, Simulink etc is highly desirable
- Knowledge and experience of control systems is highly preferred
- Experience in automotive domain is preferable
Character Traits
- Proactive
- Problem solver
- Committed and motivated
- Inquisitive and eager to learn
- Clarity of thinking
- Sense of urgency
- Can-do attitude
- Team player
Education and Experience:
B.E – EE, CS, ME (or equivalent) from a reputed institution with 3 years of experience OR
ME/MS – EE, CS, ME (or equivalent) with 1-2 years of experience
Follow CutshortShubham Vishwakarma
Full Stack Developer - Averlon