Software Engineer(EmbeddedC/C++)

MANDATORY CRITERIA:

• Education: B.Tech / M.Tech in ECE / CSE / IT
• Experience: 10–12 years in hardware board design, system hardware engineering, and full product deployment cycles
• Proven expertise in digital, analog, and power electronic circuit analysis & design
• Strong hands-on experience designing boards with SoCs, FPGAs, CPLDs, and MPSoC architectures
• Deep understanding of signal integrity, EMI/EMC, and high-speed design considerations
• Must have successfully completed at least two hardware product development cycles from high-level design to final deployment
• Ability to independently handle schematic design, design analysis (DC drop, SI), and cross-team design reviews
• Experience in sourcing & procurement of electronic components, PCBs, and mechanical parts for embedded/IoT/industrial hardware
• Strong experience in board bring-up, debugging, issue investigation, and cross-functional triage with firmware/software teams
• Expertise in hardware validation, test planning, test execution, equipment selection, debugging, and report preparation
• Proficiency in Cadence Allegro or Altium EDA tools (mandatory)
• Experience coordinating with layout, mechanical, SI, EMC, manufacturing, and supply chain teams
• Strong understanding of manufacturing services, production pricing models, supply chain, and logistics for electronics/electromechanical components

DESCRIPTION:

COMPANY OVERVIEW:

The company is a semiconductor and embedded system design company with a focus on Embedded, Turnkey ASICs, Mixed Signal IP, Semiconductor & Product Engineering and IoT solutions catering to Aerospace & Defence, Consumer Electronics, Automotive, Medical and Networking & Telecommunications.

REQUIRED SKILLS:

• Extensive experience in hardware board designs and towards multiple product field deployment cycles.
• Strong foundation and expertise in analyzing digital, Analog and power electronic circuits.
• Proficient with SoC, FPGAs, CPLD and MPSOC architecture-based board designs.
• Knowledgeable in signal integrity, EMI/EMC concepts for digital and power electronics.
• Completed at least two project from high-level design to final product level deployment.
• Capable of independently managing product’s schematic, design analysis DC Drop, Signal Integrity, and coordinating reviews with peer of layout, mechanical, SI, and EMC teams.
• Sourcing and procurement of electronic components, PCBs, and mechanical parts for cutting-edge IoT, embedded, and industrial product development.
• Experienced in board bring-up, issue investigation, and triage in collaboration with firmware and software teams.
• Skilled in preparing hardware design documentation, validation test planning, identifying necessary test equipment, test development, execution, debugging, and report preparation.
• Effective communication and interpersonal skills for collaborative work with cross-functional teams, including post-silicon bench validation, BIOS, and driver development/QA.
• Hands-on experience with Cadence Allegro/Altium EDA tools is essential.
• Familiarity with programming and scripting languages like Python and Perl, and experience in test automation is advantageous.
• Should have excellent exposure with coordination of Manufacturing Services, pricing model for production value supply chain & Logistics in electronics and electromechanical components domain.

Position: Senior Embedded Software Engineer – PCIe / Embedded Linux

Location: Bangalore (Preferred)

Experience: 7+ years

Night Shift

About the Role:

We are seeking a highly skilled Senior Embedded Engineer with strong expertise in Embedded Linux and PCIe protocol development. The ideal candidate will have deep technical knowledge of PCIe (Gen4 and above) and experience in developing and debugging embedded systems at both hardware and software levels. Exposure to AI/ML or accelerator-based systems will be considered a strong plus.

Key Responsibilities:

• Design, develop, and optimize embedded software on Linux and RTOS platforms.
• Implement and validate PCIe-based communication and device drivers (Gen4 minimum, Gen5/6 preferred).
• Work closely with hardware and system teams to debug low-level issues related to PCIe interfaces.
• Develop firmware and system-level software components for high-performance embedded platforms.
• Participate in board bring-up, performance optimization, and hardware/software integration.
• Contribute to system architecture discussions and design reviews.
• Document design, testing procedures, and performance analysis.

Core Skills Required:

• Embedded Linux development (mandatory).
• Deep understanding of PCIe protocols (Gen4 minimum; Gen5/6 preferred).
• Strong knowledge of low-level driver development, DMA, interrupts, and memory management.
• Experience with Embedded RTOS environments.
• Familiarity with hardware debugging tools (e.g., JTAG, logic analyzers, oscilloscopes).
• Proficiency in C/C++ and scripting (Python, Shell).
• Excellent problem-solving and debugging skills.

Preferred Skills (Good to Have):

• Exposure to AI/ML hardware accelerators or data processing units (DPUs).
• Understanding of SoC architecture and high-speed interconnects.
• Experience working with multi-core systems and performance tuning.

Education:

• Bachelor’s or Master’s degree in Computer Engineering, Electronics, or related field.

As a Software Engineer III – Unreal Engine, you’ll be a core technical contributor and leader on a team building high-end AAA PC/Console experiences. You’ll take ownership of critical game systems, mentor other engineers, and help define technical direction. Working alongside art, design, and production, your experience and engineering insight will shape the gameplay, tools, and systems that bring our ambitious projects to life.

What You’ll Do

• Architect, implement, and optimize complex systems in Unreal Engine 5 using C++
• Lead development of gameplay, systems, and core tech features
• Collaborate with designers, artists, and producers to ensure technical feasibility and creative alignment
• Mentor junior engineers and uphold best engineering practices
• Drive performance improvements across PC and console builds
• Participate in planning, tech reviews, and cross-functional coordination

What We’re Looking For

• 7+ years of experience in Unreal Engine-based game development
• Deep expertise in C++ and Unreal Engine internals (e.g., Gameplay Framework, Replication, UObjects, GAS, )
• Experience with multiplayer, AI, Bots, Physics and rendering systems
• Shipped multiple PC/Console titles with significant system ownership
• Excellent debugging, profiling, and performance-tuning skills
• Strong software architecture skills and understanding of real-time game systems
• Proven leadership and mentoring abilities

Nice to Have

• Familiarity with Unreal Editor tooling, plugins, and build systems
• Knowledge of Agile production pipelines
• Contributions to tool development or tech pipelines
• Understanding of AI-Tools and ability to adapt them in workflows to improve productivity

Job Category: Engineering

Job Type: Full Time

Job Location: Hyderabad

Job Description

Are you passionate about making a difference in people's lives through groundbreaking products and services ? Look no further! Protectol Health is a pioneering pharma-tech company with a holistic approach that spans conventional pharmaceuticals, nutraceuticals, nutrients, and business safety. Our dedication to the value of "Life matters" is not just a slogan – it's ingrained in every facet of our work culture and offerings.

With dedicated divisions in Pharma, Technology, Nutraceuticals, Nutriments, and Business Safety, we drive impactful research and development activities that redefine industries and touch lives. Our operational footprint extends across the GCC countries and India, allowing us to reach and transform communities on a grand scale.

If you're enthusiastic about creating a positive impact and wish to be a part of an organization that values and prioritizes lives, Protectol Health welcomes you. Join us in our mission to shape a healthier present and future. Your expertise and passion will find a meaningful home here.

Roles and Responsibilities

As an Embedded Firmware Engineer, you will be responsible for:

● Leading the firmware development for our product line of safety and medical devices.

● Designing, developing, testing, and maintaining embedded firmware.

● Collaborating with cross-functional teams to define software requirements, specifications, and architectures based on product requirements and industry standards.

● Implementing firmware solutions that comply with ATEX certification, IEC 61508, and Functional Safety (SIL standards) for devices used in hazardous locations.

● Conducting thorough testing and validation of firmware to ensure reliability, accuracy, and compliance with safety standards.

● Optimizing firmware for power efficiency and performance to meet the life of portable and battery-powered devices.

● Implement firmware algorithms for sensor calibration, data processing, and user interface interactions.

● Assisting in hardware-software integration, debugging, and troubleshooting to ensure seamless functionality of the devices.

● Collaborating with Quality Assurance and Product Validation teams to ensure the highest quality of firmware deliverables.

● Participating in code reviews and providing constructive feedback to improve code quality and maintainability.

● Keeping abreast of emerging technologies, industry trends, and advancements in embedded systems for continuous improvement and innovation.

Skills and Qualifications:

● Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or related field.

● 3+ years of experience in embedded firmware development for portable and wireless gas detectors and docking stations.

● Proficiency in C/C++ programming languages for embedded systems.

● Hands-on experience with a complete product development cycle is an add-on.

● Experience with STM32/STM8/ MSP430 or any other low-power microcontrollers for the development of low-powered devices.

● Experience in reading and optimizing analog data in various types of ADCs.

● Understanding of ATEX certification requirements and compliance.

● Understanding and practical experience with Functional Safety standards (SIL2/3 standards) in the development of safety-critical systems is an add-on.

● Experience with coding standards. (eg: Misra-C) Familiarity with System architectures and communication protocols like I2C, UART, SPI, etc. Knowledge of sleep modes and low-power optimization techniques for battery-operated devices.

● Experience in developing and using custom segment LCDs (TN, STN, etc.) used in battery-powered ultra-low power devices.

● Experience with software development tools, version control systems, and bug-tracking systems. Strong analytical and problem-solving skills with attention to detail.

● Excellent communication and teamwork skills.

● Advantages for individuals who thrive in a startup setting.

Work Culture

At Protectol Health, we prioritize our diverse and talented team. We offer flexible work arrangements and resources for well-being to support our employees' personal and professional growth. By putting people first, we attract and retain top talent and drive innovation toward our mission of improving health and well-being

• Firmware Design and Development experience on different micro-controllers.
  
• C/C++ programming
  
• Linux Commands Operating System Concepts
  
• board bring up, embedded software, Kernel Build, Yocto
  
• Shell scripting Networking Concepts Openwrt OS Concepts
  
• Must have good Communication and Presentable skills.
  
• Experience on any Wifi, Bluetooth, GSM modules is a plus.
  
• Design, develop, code, test and debug system software.

Omnitroncis is on a mission to bring robotics to real-life applications. We build & provide services for smart products. At the heart of each product is the amazing team which integrates software, hardware, sensors, AI, computer vision systems, machine learning models and robotics to orchestrate and automate the entirety of products and operations. As a result, we are able to lead better lives.

About Us:

This is an opportunity to join a growing team of electrical, mechanical and software engineers and make a substantial impact at Omnitronics. We are looking for someone that can learn, adapt and roll with a fast-paced, ever-changing environment and who isn’t afraid of uncertainty. Embedded engineering at Omnitronics involves developing electronics solutions that power a modern smart device. This involves unique industrial control systems, environmental sensor technology, data collection, computer vision systems, and automation. You ll be involved with idea generation, design, prototyping, planning, and the execution of firmware and hardware for our IoT devices.

Prerequisites

• We are looking for a person who is really interested in & enjoys technology, is Passionate about Innovation, and Can go the extra mile for perfection.
• Behavioural Attitude: Must be a Quick learner / Highly Dedicated / Responsible person

Require Person: 7

Job Type: Full-time

Office Timing: 10:00 am to 7:00 pm

Expected Start Date: ASAP

Fresher Salary: 3,000 to 15,000

Experience Salary: 10,000 to 45,000

Location: Must be from Surat, Gujarat

Below are the skills we are looking for in a candidate.

• Strong hands-on C/C++, Embedded System Development 
• Hands-on experience on ESP-IDF, STM32CubeMX, Embedded Linux, RTOS
• Good to have Python, Shell/Bash Scripting, Toolchains
• SPI, I2C, UART, RS485, CAN, and hardware subsystems
• Hardware and IoT / IT Communication protocols knowledge
• Problem-solving and analytical skills.
• Familiar with Standards (SOLID Principles, OOPs, Misra C, etc)
• Schematic / PCB Designing verification
• Ability to trace difficult problems using a variety of tools (debugger, JTAG emulator, logic analyzer, oscilloscope).
• Design, develop, code, test, and debug system software.

We are looking for Embedded software developers who will be responsible for designing, developing, optimizing, and implementing the software that is programmed into devices built around a processor/controller. Candidates need to write code to solve problems and implement systems that make a physical hardware device work through software.

Thanks and Best Regards

Position Overview:

This position is part of highly skilled fimrware team that do software board bring up of bare silicon for next generation products. In order to write system software for embedded electronic products, this position requires academic background in electronics engineering to understand hardware concepts such as digital logic, schematics, and microprocessor communications to develop effective embedded software.

Candidate should have complete knowledge of Software development cycle from architecture definition to the implementation.

Responsibilities:

• Must wear multiple hats from analyzing field and factory reported issues to software integration.
• Be a liason for troubleshooting and debugging complex systems and identifying the root cause.
• Develop detailed design documents and customer facing application notes for the system and IOT features for Mobile routers.
• Act as a product lead and be part of bigger team in software bring up.   
• Ability to work on Low level software such as bootloaders and understanding of low level functional blocks is a must.
• Work on Linux kernel and configuration.
• Write or port device drivers for Ethernet, USB, GPIO, LED, Bluetooth, Accelormeter, LCD and touch screen.
• Debug stability issues in data routing between WAN and LAN interfaces.
• Work with Software QA with test plan and execution.
• Work with Hardware team to identify and root cause stability problems.

Experience/Requirements:  

• Demonstrable knowledge of C, C++, Assembly programming skills
• Overall 10+ years of experience in embedded environment preferabily Linux.
• Board bring up proficiency with bootloaders and other low level software, must be very good with debugging techniques.
• Experience in TCP/IP networking is must for trouble shooting throughput and other traffic issues.
• Driver experience with I2C, SPI, UART, LCD, Ethernet, PCIe is a plus.
• Experience with low level debugging using JTAG.
• Experience with Makefiles, and build environments such as PTXDIST, Yocto and Buildroot.    
• Experience with version control such as git and svn.
• Good communication skills and team player.
• Ability to work independently and autonomously to meet deadlines, in a fast-changing environment.

Education: