Prpl + RDKB Developer

Key Responsibilities:

 - Develop and customize OpenWrt build systems for operator-specific router distributions

 - Build high-performance network stacks and middleware for Wi-Fi 6/7 & 5G-FWA routers

 - Implement TR-181/USP/TR-369 device management standards for global operators

 - Design scalable, modular embedded Linux systems for complex CPE environments

 - Debug and resolve critical issues: kernel panics, memory leaks, race conditions

 - Collaborate with hardware and product teams to deliver carrier-grade solutions

Must-Have Skills:

 - OpenWrt Proficiency: Customizing build systems, package configurations, feeds

 - Programming: Advanced C/C++ for resource-efficient, high-performance networking

 - Network Stack & Protocols:

   - IPv4/IPv6: Dual-stack, DHCPv4/v6, SLAAC, Prefix Delegation, MAP-T/E, DS-Lite

   - L2/L3: Linux Bridge, VLAN 802.1Q/QinQ, SoC hardware offloading

   - Routing: Multi-WAN, Failover, Policy-Based Routing, IGMP/MLD Snooping/Proxy

 - Device Management: TR-181/TR-098 data models, USP/TR-369 experience

 - Debugging: GDB, Valgrind, JTAG, Wireshark, Tcpdump

 - System Design: Defining software interfaces & integrating cross-platform middleware

Preferred Qualifications:

 - Hands-on with Airoha SDKs & MediaTek WiFi drivers

 - Familiarity with RDK-B, prplOS, prplLCM

 - QoS/QoE: Traffic Shaping - tc, HTB, FQ_CoDEL, DPI, traffic classification for Gaming/VoIP

 - Security: Firewall4/Nftables, Iptables, VPN - WireGuard, IPsec, hardware crypto-acceleration

We are actively looking for experienced C++ Developers with strong hands-on experience in 4G/5G Core Network development, particularly Control Plane and Network Programming.

⚡ Immediate Joiners are highly preferred.

🔹 Key Requirements:

• Strong programming skills in C/C++

• Strong knowledge of Data Structures, Algorithms & OOPS

• Hands-on experience in Socket Programming – TCP/UDP, Non-blocking I/O

• Experience with 3GPP message handling, parsing and protocol processing

• Strong hands-on experience in 4G/5G Core Control Plane

• Experience with MME, SGW, PGW, HSS, PCRF, AMF, SMF, UPF, UDM, AUSF, PCF, NRF

• Strong knowledge of Diameter, SIP, GTP-C, GTP-U, PFCP, NAS/NGAP, S1AP, HTTP/2

• Understanding of N1, N2, N3, N4, N6, S1-MME, S1-U, S5/S8 interfaces

• Good understanding of 4G/5G Core Control Plane procedures and call flows

• Strong networking fundamentals: TCP/IP, UDP, Routing, ARP, VLAN, Subnets, L2/L3

• Hands-on Linux development using GCC, GDB, Make and debugging tools

• Experience in low-level debugging, packet flows and performance optimization

🔹 Responsibilities:

• Develop software modules for 4G/5G Core Network systems

• Implement and optimize Control Plane protocol logic

• Work on end-to-end Control Plane call flows

• Debug low-level issues in Control Plane packet flows and system behaviour

• Collaborate with QA/DevOps for network component integration

📌 Priority: Candidates who can join immediately / within a short notice period.

Please ensure the profiles have hands-on 4G/5G Core Networking + Control Plane experience, along with relevant C/C++ development experience

About Company

We are building general-purpose autonomous robots for US construction to tackle rising costs, safety risks, and labour shortages. Our modular, multi-trade platform combines purpose-built hardware with real-time site intelligence to navigate complex environments and execute tasks with precision. Trained in high-fidelity simulation and already deployed on live sites, our robots deliver 5x faster execution, 250%+ margin expansion, and significant cost savings.

About the Role

We are looking for a versatile, hands-on software engineer to join our growing team. You will work across embedded Linux systems, networking stacks, robotic middleware, and cloud-connected services. This role demands strong fundamentals, intellectual curiosity, and the ability to learn quickly — not just familiarity with buzzwords.

On-site, Bengaluru

Responsibilities

• Design and implement robot boot-up sequences and service orchestration to ensure reliable, deterministic system bring-up.
• Configure and manage Linux networking — TCP/IP stack, HTTP, iptables, ARP, DHCP, DNS — for robot-to-cloud and inter-robot communication.
• Own CI/CD pipelines using ArgoCD, GitHub Actions, and containerized workflows to ship software to robots.
• Manage Docker-based deployment and runtime environments on robot and cloud infrastructure.
• Write and maintain system administration tooling and bash scripts for fleet management and diagnostics.
• Collaborate closely with robotics, perception, and application teams to integrate platform capabilities.
• Establish and enforce best practices around Git workflows, branching strategies, and code review.
• Lead and mentor a small platform engineering team — set technical direction, conduct code reviews, and drive execution.

Requirements

All candidates must demonstrate solid, hands-on competency in every item listed below.

• Linux systems programming in C
• File I/O — read, write, seek, memory-mapped files
• Multi-threading — pthreads, mutexes, condition variables, thread safety
• Socket communication — TCP/UDP sockets, select/poll/epoll
• Basic data structures & algorithms — stack, heap, queue, linked list
• General comprehension ability — reading technical manuals, datasheets, and RFCs
• Python scripting
• Bash scripting
• Git — CLI usage, branching, merging, rebasing, conflict resolution
• Standard UML diagrams — flowchart, sequence diagram, deployment diagram
• Windowless text editor — vim, nano, or equivalent

Strong Advantage

• C++ programming — C++17, OOP, templates, STL
• Common network protocols — DHCP, ARP, TCP, UDP, DNS
• Network configuration — routers, switches, VLANs, subnetting
• Server-client application architecture
• P2P vs. centralised communication — DDS vs. MQTT
• Database management — SQL vs. NoSQL, schema design
• Network security — checksums (CRC, MD5, SHA), public-key encryption, digital signatures
• ROS2 framework — pub/sub, services, actions, lifecycle nodes, DDS transport
• CMake build system — targets, find_package, CTest integration
• Docker — Dockerfiles, docker-compose, remote image registries

Must-haves (non-negotiable)

• Strong Linux systems programming in C — multi-threading (pthreads), socket communication (TCP/UDP, epoll), and file I/O
• Hands-on experience with CI/CD pipelines (ArgoCD, GitHub Actions) and Docker-based deployments
• Networking expertise — TCP/IP stack, DHCP, DNS, iptables, inter-device communication
• Proficiency in Python and Bash scripting for fleet management and diagnostics
• ROS2 experience (pub/sub, DDS, lifecycle nodes) is a strong advantage

We are hiring an Embedded Software Engineer to develop firmware and low-level software for embedded devices and connected products.

Responsibilities

• Develop firmware in Embedded C and C++ for microcontroller-based systems
• Build real-time applications on RTOS platforms such as FreeRTOS
• Write and maintain device drivers for peripherals (UART, SPI, I2C, CAN)
• Develop and customise Embedded Linux components
• Debug hardware and software issues using oscilloscopes, JTAG and debuggers
• Work with hardware teams on board bring-up and testing

Requirements

• 1+ years of experience in embedded software development
• Strong Embedded C and C++ programming skills
• Hands-on experience with microcontrollers (ARM Cortex, STM32, ESP32 or similar)
• Experience with RTOS and device driver development
• Exposure to Embedded Linux is a plus

Role: Software Developer

Employment Type: Full Time

Location: Gurugram, India

Educational Qualification: BE/BTech/ M.Tech / MS in Software Engineer

Work Experience: 6-8+ years of relevant work experience

Role Description:

Design and develop software for satellite systems, including onboard flight software and ground segment applications, ensuring reliability and real-time performance. Collaborate with hardware, AOCS, and mission teams to implement, test, and integrate software across the mission lifecycle. Support verification, validation, and in-orbit operations for robust and mission-critical performance.

Responsibilities & Duties:

• Design, develop, and maintain onboard flight software (FSW) and ground segment applications for satellite missions
• Develop real-time, embedded software for spacecraft subsystems (AOCS, EPS, payload, communication)
• Implement software in languages such as C/C++, Python, and embedded C for high-reliability systems
• Design software architecture, modules, and interfaces aligned with system requirements and mission objectives
• Develop drivers and low-level firmware for hardware interfaces (SPI, I2C, UART, CAN, SpaceWire, Ethernet)
• Work with real-time operating systems (RTOS) such as FreeRTOS or equivalent
• Implement communication protocols for telemetry, telecommand, and data handling
• Collaborate with hardware, AOCS, RF, and systems teams for seamless hardware-software integration
• Develop simulation tools, test scripts, and automation frameworks using Python or MATLAB
• Perform software verification and validation (V&V), including unit testing, integration testing, and system testing
• Develop and execute Software-in-the-Loop (SIL) and Hardware-in-the-Loop (HIL) test environments
• Perform code reviews, static analysis, and debugging to ensure reliability and performance
• Optimize software for real-time performance, memory usage, and fault tolerance
• Implement fault detection, isolation, and recovery mechanisms
• Support integration, system testing, and environmental testing (EMI/EMC, thermal vacuum, vibration)
• Develop and maintain technical documentation (design documents, interface control documents, test reports)
• Participate in design reviews (SRR, PDR, CDR, TRR) and technical discussions
• Support launch operations, commissioning, and in-orbit software updates and anomaly resolution
• Utilize version control and collaboration tools such as Git
• Work within structured development processes (Agile/Waterfall/Sprint) and configuration management systems
• Troubleshoot software and system-level issues and perform root cause analysis

Desirable Skills & Certifications:

• Strong proficiency in C/C++ and Python for embedded and system-level software development
• Experience with real-time operating systems such as FreeRTOS or equivalent RTOS platforms
• Familiarity with spacecraft communication protocols (UART, SPI, I2C, CAN, SpaceWire, Ethernet) and telemetry/telecommand systems
• Experience in Software-in-the-Loop (SIL), Hardware-in-the-Loop (HIL), and simulation-based verification
• Knowledge of space software standards and practices (ECSS, NASA, ISRO, MISRA C guidelines)
• Proficiency in version control and development workflows using Git and CI/CD practices
• Understanding of embedded systems, firmware development, and hardware-software integration

Roles & Responsibilities

About the Role We are seeking an experienced Senior Network Engineer specializing in Wireless networking to design, implement, and manage enterprise-grade Wi-Fi solutions. The role requires deep expertise in wireless technologies, RF design, security, troubleshooting, and optimization across large-scale environments. Key Responsibilities Wireless Network Design & Architecture • Design and deploy enterprise wireless networks (campus, branch, and large-scale environments). • Conduct RF planning, site surveys, and capacity analysis using tools like Ekahau, AirMagnet, and similar. • Define wireless architecture standards, best practices, and design frameworks. Wireless Implementation • Configure and manage wireless controllers and access points (Cisco, Aruba, Juniper Mist, Ruckus, etc.). • Implement SSIDs, VLAN mappings, mobility groups, and roaming configurations. • Ensure high availability and seamless roaming across wireless environments. 1 Wireless Security • Design and implement secure wireless solutions (WPA3, 802.1X, EAP protocols). • Integrate wireless networks with NAC solutions (Cisco ISE, Aruba ClearPass). • Monitor for rogue APs, unauthorized access, and wireless threats. RF Optimization & Troubleshooting • Analyse RF performance, interference, coverage gaps, and client experience. • Troubleshoot complex wireless issues such as latency, packet loss, roaming delays. • Perform spectrum analysis and continuous optimization. Monitoring & Performance Management • Use monitoring tools (Cisco Meraki/Prime/DNA Center, Aruba Central/AirWave, Mist Cloud) to track performance. • Implement QoS policies for voice/video over Wi-Fi. • Drive improvements in user experience and network reliability. Cloud & Modern Wireless • Work with cloud-managed wireless platforms (Meraki, Mist, Aruba Central). • Support hybrid integration with enterprise and cloud networks. • Stay updated on Wi-Fi 6 / Wi-Fi 6E / Wi-Fi 7 technologies. Automation & Innovation (added advantage) • Develop automation scripts and workflows for wireless provisioning and monitoring. • Leverage APIs and tools (Python, Ansible, Terraform) for configuration management. • Drive continuous improvement initiatives. Incident & Change Management • Provide L3/L4 support for major wireless incidents. • Lead root cause analysis and problem management. • Support change implementation with risk assessment and rollback planning. Documentation & Governance • Maintain detailed documentation (designs, runbooks, SOPs). • Ensure compliance with enterprise security and governance policies. • Support audits and regulatory requirements. 2 Required Skills & Qualifications • Bachelor’s degree in computer science, IT, or related field. • 3–6 years of experience in networking, with strong focus on wireless. • Hands-on expertise with: -Enterprise wireless platforms (Cisco, Aruba, Mist, Ruckus) -RF fundamentals (channel planning, power levels, interference mitigation) -Wireless protocols: 802.11 a/b/g/n/ac/ax (Wi-Fi 6/6E/7) • Strong knowledge of: -TCP/IP networking and network integration (R&S fundamentals) -Authentication protocols (802.1X, RADIUS, EAP) -High-density wireless design.

Ideal Candidate

1Strong Wireless Network Specialist Profile with enterprise Wi-Fi design, implementation, and RF expertis

2Mandatory (Experience 1): Must have 3+ years of experience in networking, with a strong focus on wireless (enterprise Wi-Fi design, implementation, and RF).

3Mandatory (Experience 2): Must have hands-on experience designing and deploying enterprise wireless networks (campus, branch, large-scale), including RF planning, site surveys, and capacity analysis using tools like Ekahau or AirMagnet.

4Mandatory (Experience 3): Must have experience providing L3/L4 support for major wireless incidents, with root-cause analysis and problem management.

5Mandatory (Tech skill 1): Must have hands-on expertise with enterprise wireless platforms (Cisco, Aruba, Mist, Ruckus) — configuring controllers, access points, SSIDs, VLAN mappings, mobility groups, and roaming

6Mandatory (Tech skill 2): Must have strong RF fundamentals (channel planning, power levels, interference mitigation), high-density design, and hands-on experience with 802.11 a/b/g/n/ac/ax (Wi-Fi 6/6E/7).

7Mandatory (Tech skill 3): Must have strong TCP/IP networking / R&S fundamentals and knowledge of authentication protocols (802.1X, RADIUS, EAP) and secure wireless (WPA3)

8Mandatory (Tech skill 4): Must have RF optimization and troubleshooting experience — interference, coverage gaps, latency, packet loss, roaming delays, and spectrum analysis.

9Mandatory (Tech skill 5): Must have hands-on experience planning and executing Wi-Fi 6E / Wi-Fi 7 upgrades and migrations, including the key design and hardware considerations involved

10Mandatory (Education): Must have a Bachelor's degree in Computer Science, IT, or a related field

11Preferred (Certifications): CWNA / CWNP / CWAP / CWDP, CCNP Enterprise (Wireless) / CCIE Enterprise Wireless, or Aruba ACMP / ACP-CA

12Preferred (Adjacent): NAC (Cisco ISE, Aruba ClearPass); monitoring tools (Meraki/Prime/DNA Center, Aruba Central/AirWave, Mist Cloud); automation/scripting (Python, Ansible, Terraform); SD-Access, BLE/IoT, QoS for voice/video.

Qualifications & Requirements:

• 4+ years of experience in C++ application development.
• Hands-on experience with C++11 or above.
• Strong knowledge of object-oriented programming and software design.
• Deep understanding of STL, multi-threading, socket programming, and data structures.
• Solid grasp of Linux development and debugging techniques.
• Proficient in using GCC, GDB, and Makefile.
• Familiarity with Valgrind and similar analysis tools.
• Experience with version control tools like Git.
• Experience writing and maintaining automated tests.
• Experience in capital markets/trading domain is a plus.

Skills:

• Strong problem-solving and analytical thinking.
• Clear and effective communication.
• Self-driven with the ability to work independently.
• Passionate about high-quality software and strong engineering practices.
• Comfortable working in a fast-paced, collaborative environment.

We are seeking an experienced SONiC Forwarding Developer with 10+ years of software engineering expertise in low-level systems programming and networking data plane architectures. In this high-impact engineering role, you will design, develop, and benchmark high-performance forwarding software on the Software for Open Networking in the Cloud (SONiC) operating system. You will collaborate directly with top-tier ASIC hardware vendors and cross-functional teams to engineer line-rate L2/L3 forwarding, ACL, and QoS mechanisms for hyper-scale cloud data centers.

SONiC Forwarding Developer

Experience: 10+ Years

Location: Bangalore / Hyderabad / Delhi / Mumbai

Work Mode: Onsite

Contract Duration: 6 Months

DATA CENTER NETWORKING & SYSTEMS SOFTWARE ENGINEERING

Executive Role Summary

We are seeking an experienced SONiC Forwarding Developer with 10+ years of software engineering expertise in low-level systems programming and networking data plane architectures.

In this role, you will design, develop, and benchmark high-performance forwarding software on the Software for Open Networking in the Cloud (SONiC) operating system. You will collaborate with ASIC hardware vendors and cross-functional teams to engineer line-rate L2/L3 forwarding, ACL, and QoS mechanisms for large-scale data center networks.

1. Key Responsibilities

• Architect, develop, and maintain high-performance network forwarding software using C and C++, with Python and Go tooling.
• Work with switching silicon/ASIC vendors to implement, validate, and tune hardware-specific forwarding features through SAI.
• Design, implement, and debug forwarding pipelines including ACL, QoS, queue scheduling, and traffic shaping.
• Develop L2/L3 packet switching and routing solutions, including firewall integrations, L2VPN and L3VPN.
• Work with data center networking protocols such as BGP, OSPF, EVPN, and VXLAN.
• Profile and optimize software performance, memory utilization, cache locality, and latency.
• Collaborate with hardware, QA, and network operations teams for testing, debugging, and product delivery.

Job Summary:

We are seeking a skilled Firmware Developer with 3 years of experience to join our team. The successful candidate will be responsible for developing and maintaining embedded software for our products. The candidate should have a strong understanding of the software development life cycle, embedded systems, and the C programming language.

Key Responsibilities:

• Develop and maintain embedded software for our products

• Design and implement software modules and drivers for embedded systems

• Collaborate with hardware engineers to integrate software and hardware components

• Test and debug embedded software

• Create and maintain technical documentation

• Participate in code reviews and contribute to software architecture and design discussions

• Stay up-to-date with the latest trends and technologies in embedded systems and software development

Requirements:

• Bachelor’s degree in Computer Science, Electrical Engineering, or a related field

• 3 years of experience in embedded software development

• Strong understanding of software development life cycle

• Proficiency in C programming language

• Experience with embedded systems and microcontrollers

• Experience with communication protocols such as SPI, I2C, UART, and CAN

• Familiarity with software development tools such as Git, Jira, and Jenkins

• Strong analytical and problem-solving skills

• Ability to work independently and in a team environment

• Excellent communication and interpersonal skills

Preferred qualifications:

• Degree in Electrical Engineering, or a related field

• Experience with wireless communication protocols such as Bluetooth, LoRa & Wi-Fi

• Knowledge of real-time operating systems such as FreeRTOS, uC/OS-II, or VxWorks

• Experience with Agile software development methodologies

Benefits:

• Health insurance
• Leave encashment
• Paid sick time
• Provident Fund
• 
  

Job Type: Full Time

Job Location: Perundurai

State Wise: Tamil Nadu

Divison Wise: R & D Division