Lab Technician
at Electric vehicle charging infrastructure solutions.( SC1)
- As a Lab Technician, you will work on PCB assembling, PCB reworking, soldering, and desoldering. And maintaining the LAB
- Soldering and desoldering of the electronic components down to 0402 packages and through-hole components.
- Good electrical knowledge of Electronic components and their assembly requirements
- Kit preparation as per BOM/JOB List
- Will be supporting Hardware Design Engineers in the design, prototype, testing & production phases of the project.
- Hands-on experience in handling crimping tools, multimeter, CRO, DSO, Drill machines, hand tools, etc. Digital multimeter and other testing equipment.
- Good knowledge of AC and DC low and high-voltage power supplies.
- System Assembly and disassembly skills.
- Work on multiple locations (JBN & Cheemasandra)
- Qualification : ITI / Diploma (Electrical / Electronics / Electronics and communication, Instrumentation and Electronics or equivalent)
Shubham Vishwakarma
Full Stack Developer - Averlon
Similar jobs
ExpressPosition: Senior Hardware Engineer
Requirement: Immediate joining
Job Description for the above position:
➢ 5 to 7 years of experience in high-speed and Mixed-signal product design and development.
➢ Hands-on experience in circuit design and circuit simulation, an excellent skill set is a must in circuit analysis.
➢ Experience in Industrial/MIL grade environmental system design, in which processor-controlled and FPGA-controlled devices are involved.
➢ Excellent component selection and decision-making skills.
➢ Working experience with high-speed digital interfaces such as PCI Express, DDR3/4 SDRAM, 100Mbps/1000Mbps/10Gb Ethernet, Battery management system and USB2.0/3.0. This is must
Requirement.
➢ Experience in a range of technologies including digital, analog and power electronics.
➢ Hands-on experience in writing low-level design documents, architectural design documents and test procedures is a must to apply for this position.
➢ Excellent knowledge of electronic circuits and analysis.
➢ Familiarity and Experience with Altium Designer and Allegro tools.
➢ The ability to work with software engineers to design and debug systems.
➢ Experience in Thermal analysis, Load analysis and Timing analysis.
➢ Knowledge of Signal integrity and power integrity.
➢ Experience in system-level design, logical design etc.
➢ Experience and involvement in the complete cycle of Product development and design skill is a must requirement for this position.
➢ Good knowledge of EMI/EMC testing procedures and Certification standards.
➢ Guide and support all aspects of PCB layout, fabrication, and assembly processes.
➢ Knowledge of analog and digital video interfaces, especially HDMI, Display Port, and SMPTE
video standards a plus.
➢ Hands-on experience in design/troubleshooting/updating hardware.
➢ Thorough knowledge of MS Office applications, Word, Excel, and Visio.
➢ Mentoring the team, being an individual contributor, willingness to take ownership of the design is a must to apply for this position.
➢ Experience with testing tools like Oscilloscopes, Signal Analyzers etc...
➢ Strong knowledge on layer stack-up build.
Qualification:
➢ BE/B. Tec or ME/M. Tech in Electronics/Electronics and communication Person
Specification/Competencies:
➢ Self-motivated
➢ The ability to work independently, within or lead the team.
➢ Well organized
➢ Strategic thinker.
➢ Proactive
➢ Ability to manage multiple tasks and work toward long-term goals.
➢ Excellent communication skills (verbal and written)
➢ Solid understanding of engineering fundamentals and technical problem-solving skills.
➢ Experience in establishing and sustaining strong relationships with the extended team.
CC++We are looking networking professionals with the following skill set,
Experience :6+ years of experience in the networking domain
Key skills:
- Must have 6+ years of experience in C/C++ programming language.
- Knowledge of Go programming language and Python programming language is a big plus.
- Strong background in L4-L7 Internet Protocols TCP, HTTP, HTTP2, GRPC and HTTPS/SSL/TLS.
- Background in Internet security related products such as Web Application Firewalls, API Security Gateways, Reverse Proxies and Forward Proxies
- Proven knowledge of Linux kernel internals (process scheduler, memory management, etc.)
- Experience with eBPF is a plus.
- Hands-on experience in cloud architectures (SaaS, PaaS, IaaS, distributed systems) with continuous delivery
- Familiar with containerization solutions like Docker/Kubernetes etc.
- Familiar with server less technologies such as AWS Lambda.
- Exposure to machine learning technologies and distributed systems is a plus
C++
Python● Write Effective Codes In C++, Develop Software For Embedded Systems Based On STM32, NRF
● Support And Improve Existing Software
● Prepare Documentation For The Created Software. Qualifications
● Confident Knowledge Of C++ 17, Object-Oriented Programming, Embedded Software Development
● Proficiency With Microcontrollers Of The STM32 And / Or NRF Series
● Experience With RTOS
● Familiarity With Git, Linux
● Technical English
● Knowledge Of Python As An Advantage
● Any Experience With UAS \ UAV \ Drones is much appreciated
• Analyzing/Triaging the Wi-Fi & GPS Connectivity and enhancing the Wi-Fi & GPS Features
Job requirements:
• Engineering degree
• 5-8 years of hands-on experience on Connectivity concepts and Wi-Fi Module
• Strong Knowledge on Wi-Fi Architecture and Android Framework and Firmware layer
• Strong knowledge of Wi-Fi Features, and Wi-Fi Standards
• Good understanding of Qualcomm CNSS subsystem, firmware and system level features
• Strong Knowledge on the Wi-Fi Debugging concepts & Log collection and Wlan Standards
• Ready to Debug/work in any Connectivity modules like NFC/Bluetooth/GPS
• Preferably should have experience, who is working in Qualcomm SM 6X/7X/8X series
Location : Hyderabad
Qualifications: BE/BTECH from EE/EC
Experience : 3-5 Years
Desired Candidate Profile:
-Development of Embedded device drivers, Ethernet, USB, SPI.
-Able to read data sheets.
-Good debug skills.
-Board bring up skill.
-Worked on application processor type boards( T2080/2081 etc. )
-Strong in embedded C
-Proficient in board bring up and device drivers is needed.
-System programming and building multi-platform SDK on Linux or other OS is desirable.
-Onsite system integration.
-Should have hands on debugging experience.
-Candidate is expected to have strong knowledge of C and C++.
-Understanding and experience using structured programming techniques.
Job Type: Full-time
Salary: ₹300,000.00 - ₹700,000.00 per year
Schedule:
Morning shift
Ability to commute/relocate:
hyderabad, Hyderabad - 500003, Telangana: Reliably commute or planning to relocate before starting work (Required)
Experience:
total work: 3 years (Preferred)
C++Role & Responsibilities
- Strong proficiency in C++ with minimum 2 years of Development
- Knowledge of the STL, containers, algorithms and data
- Good understanding on Design patterns and memory
- Familiarity with debugging tools, such as Valgrind, winDBG, WireShark is an additional advantage.
Desired Experience
- (2-6 Years) of Experience as C++ Developer
DUTIES & RESPONSIBILITIES
- Own & lead full cycle development: design, implementation, testing & debugging for an automotive product.
- Create conceptual system designs, assess risks, conduct design trade studies, and develop a product that meets feature requirements for integrating sensor, processing and software systems.
- Lead innovative system development projects with responsibility for achievement of cost, schedule, and technical requirements, with an eye toward technology maturation, transition, and follow on work.
- Generate comprehensive engineering documentation.
- Responsible for end-to-end system firmware development to include power management, boot loaders, scheduling, RTOS and /or bare metal implementations.
- Troubleshoot and resolve complex software problems in embedded real-time systems.
- Source code development, review & maintenance (C/C++).
- Dive into & take ownership of critical design issues.
- Analyse & propose solutions for performance bottlenecks.
- Address all aspects of technology readiness, including manufacturability.
- Help build robust methodology and processes to deliver the technology to products.
REQUIRED SKILLS & EXPERIENCE
- Experience in embedded architecture, external interfaces, product constraints, along with ability to develop architectures / features that meet these constraints while providing new value for the platform.
- Experience in system architecture, operating system, device architecture, hardware design.
- Strong background in software methodology & full cycle development (Design, implementation, testing & debugging).
- Expertise in embedded microcontrollers’ architecture.
- Expertise in software designing and programming in C/C++ is a must.
- Algorithm modelling, benchmarking, implementation & digital signal processing.
- Understanding of hardware & software co-verification & emulation platforms
- Experience in understanding hardware, clock-level issues, bridges, delays, interrupts, clock gating, polling etc.
- Experience with lab instrumentation like oscilloscope, logic/ protocol for debugging embedded systems at HW level.
- Bachelors | Masters degree in Computer Science or Electronics & Communication engineering with 2-5 years of relevant experience is a must.
Amazon Web Services (AWS)- Develop or integrate with a Charging management system (CMS).
- Develop the backend for the apps (subscription, locating, reservation, payments, operation).
- Develop the backend for the host apps (setting availability, pricing).
- Develop the central dashboard for internal purposes.
- Develop the dashboard for monthly revenue remittance to hosts.
- Develop a dashboard for network partners.
- Develop the system for custom ad delivery in invoices.
- Setup, Deploy and Manage the servers and APIs.
C++C
Follow CutshortShubham Vishwakarma
Full Stack Developer - Averlon