IoT solution Engineer

IoT Engineer – Telematics & C#/.NET

Experience :05+ Years

Location : Ahmedabad

ABOUT MYFMS

MyFMS is Micpoint B.V.'s SaaS platform for fleet, facility, and access management, built on .NET and C#, and hosted on our own private cloud in the Netherlands, spread across two data centers. A key part of MyFMS is its connector layer: the software that links telematics and IoT hardware in the field (such as GPS trackers and CAN-bus interfaces) to the platform. To further build out and standardize this layer, we're looking for an IoT Engineer with C#/.NET development experience.

WHAT YOU'LL DO

•    Implement and maintain telematics integrations in C#/.NET on MyFMS's connectors, which link telematics hardware (e.g. GPS trackers and CAN-bus interfaces) to the platform.

•    Investigate which configurations, protocol settings, and command sets of supported hardware (e.g. CAN/LVCAN parameters) can serve as a standard, and document them.

•    Research and manage firmware versions for telematics devices, and advise on firmware updates and compatibility.

•    Translate device-specific protocols into a uniform, reusable data structure within the platform.

•    Document device configurations and firmware standards in Markdown for the development team and support organization.

•    Work according to our DevOps way of working, integrating your work into the CI/CD pipelines we use for testing and releases.

•    Collaborate with the (international) development team on the architecture of the connector layer and contribute to the technical roadmap.

•    Support troubleshooting of field issues, such as connectivity or synchronization problems with hardware.

•    Build simulators for telematics hardware, so protocols, configurations, and firmware behavior can be tested without needing physical devices.

•    Use AI, and work with and train models, to build simulations and test setups.

•    Ensure the connector integrations are fully testable (including unit and integration tests), safeguarding the quality of the telematics integrations.

WHAT THE ROLE REQUIRES

•    Bachelor's/Master's level thinking and working ability in a technical field, e.g. Electrical Engineering, Embedded Systems, Computer Science, or similar.

•    Demonstrable experience with software development in C#/.NET.

•    Affinity with or experience in IoT/telematics hardware, such as GPS trackers, CAN-bus interfaces, and sensors.

•    Experience with Ruptela, Teltonika, and Digital Matter hardware is a plus.

•    Knowledge of communication protocols such as CAN, LVCAN, OBD-II, MQTT, and/or TCP/IP is a plus.

•    Experience reading, configuring, or updating firmware on embedded devices is a plus.

•    Experience building test or simulation tools (e.g. device or protocol simulators) and with test automation (unit/integration tests) is a plus.

•    Experience with DevOps practices and CI/CD pipelines (incl. Azure DevOps) is a plus.

•    Affinity with AI/machine learning, for example training models for simulations and test setups, is a plus.

•    You're analytical and structured: you enjoy bringing order to a wide range of device configurations and documenting what you find.

•    You value quality assurance and structurally build testability into your own work.

•    You're proficient in English, spoken and written (the team's working language); Dutch is not required.

Embedded Systems / Firmware Engineer

Key Responsibilities

• Develop embedded firmware for IoT and connected devices using C/C++.
• Work on RTOS, bare-metal programming, memory management, device drivers, and communication protocols.
• Develop and integrate drivers/interfaces for cameras, motors, sensors, and vision systems.
• Work with Python and Shell scripting for development and automation.
• Apply basic AI/ML and computer vision concepts to embedded applications.
• Collaborate on electrical and mechanical design, hardware integration, testing, and debugging.

Required Skills

• C, C++, Python, Shell Scripting
• Embedded Systems & Firmware
• IoT, RTOS, Bare Metal
• Memory Management & Device Drivers
• Communication Protocols
• Camera, Motor & Vision Systems
• Basic AI/ML understanding
• Electrical & Mechanical Design understanding

About Jinn

Jinn is a Voice AI Tech Company. It helps businesses get better RoI specially by helping sales processes with the use of Voice AI Tech. We are adding a business line which includes an audio device that can reliably capture audio in various environments.

About role:

• This Role in a B2B SaaS startup in AI space led by 2X entrepreneurs from IIT, IIMs. Fast paced with a lot of learning and growth.
• Responsibility: Helping engineer/assemble/bring together an IoT/ hardware device that can accomplish product goals with required constraints. Great high stakes exposure for fresh grads
• Duration: 3-6 months internship || Converts to Full Time based on performance 
• Compensation (Stipend): 20-25k per month || Full time 4.5lpa - 6LPA

Ideal Profile: Interested in building a career in IoT/Tech, good communication, good discipline, solid understand of tech (AI)

Skill Sets

Look for someone who:

•⁠ ⁠Has built at least 1 IoT project end-to-end

•⁠ ⁠Knows Arduino + one of ESP32 / nRF52

•⁠ ⁠Has touched audio input (even basic)

•⁠ ⁠Is comfortable debugging hardware (this is key)

1.⁠ ⁠Embedded Systems Programming (Must-have)

•⁠ ⁠C/C++ (Arduino framework or ESP-IDF)

•⁠ ⁠Working with:

  * ESP32 OR

  * Seeed Studio XIAO BLE nRF52840 Sense

•⁠ ⁠Skills:

  * GPIO, I2S (for mic input)

  * Power modes (deep sleep, wake triggers)

  * Memory constraints (huge in audio use cases)

👉 This is the backbone. If they can’t do this well, project stalls.

2.⁠ ⁠Audio Handling + Signal Basics

•⁠ ⁠Understanding:

  * Sampling rate (16kHz vs 44.1kHz)

  * PCM audio buffers

  * Latency vs quality trade-offs

•⁠ ⁠Practical skills:

  * Using I2S microphones (INMP441, etc.)

  * Basic noise filtering

  * Voice Activity Detection (VAD)

👉 Without this, you’ll just get noisy unusable recordings.

3.⁠ ⁠Power & Hardware Basics (Often underestimated)

•⁠ ⁠LiPo battery handling

•⁠ ⁠Charging IC (TP4056 type)

•⁠ ⁠Power optimization:

  * Sleep modes

  * Sampling intervals

Many prototypes fail here (battery drains in 1 hour 😅)

4.⁠ ⁠Connectivity (BLE / WiFi)

•⁠ ⁠BLE (for XIAO nRF52840):

  * Data chunking (BLE MTU limits!)

  * Pairing + mobile relay model

•⁠ ⁠WiFi (for ESP32):

  * HTTP / WebSocket streaming

  * Retry + buffering

Trade

Greetings from Skoegle IoT Innovations Pvt Ltd 

Job Summary

We are looking for an experienced Embedded Firmware Engineer with expertise in embedded systems, firmware architecture, RTOS, and embedded software development for IoT, wearable, automotive, industrial, and medical-grade products.

Key Responsibilities

• Design, develop, debug, and maintain firmware in C, C++, and Embedded C.

• Develop firmware for ESP32, nRF52832/52840, ATmega328P, and Raspberry Pi platforms.

• Integrate sensors using I2C, SPI, UART, ADC, GPIO, PWM, CAN, and USB.

• Develop RTOS and bare-metal firmware.

• Implement BLE, GSM/4G, GPS/GNSS, LoRa, Wi-Fi, NFC/RFID communication.

• Design bootloaders, OTA updates, and secure firmware upgrades.

• Optimize power consumption, sleep modes, memory allocation, and performance.

• Develop sensor drivers, calibration routines, and medical-grade firmware.

• Program bare ICs and support PCB bring-up, pin selection, and hardware validation.

• Support HTTP/HTTPS GET/POST/PUT APIs and embedded networking.

Required Skills

• Embedded Systems and Embedded Software Development

• C, C++, Embedded C

• RTOS, Bare-Metal Programming

• Operating Systems fundamentals

• I2C, SPI, UART, Digital & Analog Signals

• Sensor Integration

• Arduino IDE, VS Code, SEGGER Embedded Studio, J-Link

• ESP32 Series, nRF52832/52840, ATmega328P, Raspberry Pi

• BLE (UUIDs), GSM (band configuration), GPS, LoRa

• Python, HTML, HTTP/HTTPS

• Bootloader Development, OTA, Power Optimization

• Memory Allocation, Sleep Modes, Sensor Calibration

• Machine Learning on Embedded Systems (preferred)

Platform Engineer

Location: Bengaluru, India (Hybrid)

Employment Type: Full-time

Experience: 2-4 years

About Compnay

This is driving the electric mobility revolution through cutting-edge software, infrastructure, and professional services. Our technology empowers utilities, cities, fleets, transit agencies, and automakers to deploy EV charging infrastructure at scale safely, efficiently, and sustainably. With a global footprint spanning three continents and operations in 13 countries, we are passionate about shaping the future of sustainable transport.

Operating over 70,000 charge points globally, this is driving the transition toward cleaner, smarter, and more efficient mobility. The India team serves as a critical operational hub, supporting global platforms focused on decarbonization, digitalization, and scalable infrastructure growth.

Role Overview

What you’ll do:

• Ensure system reliability, uptime, and performance of global platform.
• Conduct real-time surveillance of our EV charging systems to proactively identify and mitigate performance issues and anomalies near 24/7 basis. As such, you collaborate with IDT and FMC players to ensure incident detection also happens outside office hours (monitoring shifts among team members subject to duty schedule).
• Deliver on change & releases like firmware changes and drive insights & intelligence back into testing processes and tech discussions with the wider organization.
• Successfully deliver and project manage first time right commissioning activities alongside our Engineering Procurement Contract Management (EPCM) partners to successfully bring charge points onto our Charge Point Management System (CPMS).
• Provide technical guidance and support to DC specialists during the commissioning of EV charging solutions.
• Work closely with Shell, Engineering, and IT colleagues to ensure projects are completed on time and to specification.
• Act as a liaison with the Engineering Procurement Contract Management (EPCM) partner to manage projects from start to finish, ensuring charge points are successfully onboarded on the Charge Point Management System (CPMS).
• Collaborate with development, operations and support teams to build scalable and resilient systems.
• Contribute to incident response, root-cause analysis, and post-mortem reviews, driving continuous improvement.
• Participate in capacity planning, performance tuning, and resource optimization.
• Integrate security and compliance best practices into all infrastructure operations.
• Stay current with emerging SRE tools, frameworks, and cloud technologies to continuously improve reliability practices.
• Participate in and lead on-call rotations and incident response, conducting detailed postmortems and RCA reports.
• Flexible to resolve blocking issues during off hours or weekends if required.

What We’re Looking For:

Basic Qualifications and Skills

• Bachelor’s degree in Engineering, Electrical, ECE, Computer Science, Information Technology, or related field.
• 2–4 years of overall experience with at least 1+ years of experience as a Site Reliability Engineer, DevOps Engineer, or Technical Project Coordinator.
• Proven experience of DevOps, SRE or Technical Project Coordination with IoT or connected devices-based platforms.
• Experience with incident management and on-call best practices. Provide support to on-call engineers.
• Excellent analytical and problem-solving skills with a proactive mindset.
• Expertise with monitoring and observability tools (Dynatrace, Prometheus, Grafana, Zabbix, etc.).
• Solid understanding of cloud platforms (AWS) and AWS native services (EKS, EC2, S3, RDS, Lambda).
• Proactively monitor the network, triage performance outliers, and coordinate correction actions to ensure optimal system functionality.
• Fluency in English (spoken and written).
• Successfully recommission or decommission chargers following changes in our network.
• Responsible for the go-live of the chargers on Shell’s public network following commissioning attempts.

Additional Information

• This role involves managing infrastructure for a global platform operating in over ten countries, requiring effective communication and collaboration across regions.
• Strong verbal and written communication skills, along with availability and flexibility to resolve blocking issues, are essential to support on-call engineers.
• This role may involve EU or US time-zone shifts based on business requirements.
• Shift timing: 2 PM IST to 11 PM IST.

What is required to be successful in this role:

• Global platform experience (B2C or B2B).
• AWS native service experience.
• Firmware deployment and cloud cost optimization experience.
• Strong exposure to monitoring and alerts.
• Experience with firmware rollout, IoT devices onboarding and offboarding will be an added advantage.
• Experience as an SRE or DevOps Engineer with some exposure to Project Management or Technical Project Management in IoT-based projects will be helpful.  

What We Offer

• Work with some of the brightest minds in the emerging EV industry.
• Make a tangible impact in reducing carbon emissions and enabling sustainable energy.
• Freedom to suggest, implement, and innovate on systems, processes, and technologies.
• Daily ownership in a high-growth, challenging environment.
• Flexible work environment with hybrid schedules and virtualization options.
• Competitive pay and benefits including health coverage, innovative PTO program, and performance bonuses.

Power Electric Vehicles with embedded software for battery management and autonomous driving.

What you'll do:

• Develop BMS algorithms (SOC/SOH estimation)
• Implement CAN bus communication protocols
• Code motor control algorithms (FOC, sensorless)
• Build ADAS features (ultrasonic parking, vision)
• HIL testing with Vector tools
• Optimize for automotive-grade reliability (AUTOSAR)

What we need:

• C/C++, Embedded Linux/RTOS
• Microcontroller experience (STM32, NXP)
• Control systems or automotive interest
• Debugging skills (oscilloscopes, logic analyzers)

Future-proof skills:

• Work on actual EV prototypes
• Portfolio for Tata, Mahindra EV teams
• Automotive cybersecurity exposure

We are looking for Embedded Developer with Leading Global MNC - Faridabad

Description:

• Strong experience with 32-bit microcontrollers such as STM32, NXP, Renesas, TI, Microchip, etc.
• Excellent knowledge of C/C++ programming and exposure to Assembly.
• Strong experience with RTOS such as FreeRTOS, µC/OS, embOS, VxWorks, QNX, etc.
• Hands-on experience in developing HAL, BSP and low-level device drivers.
• Strong understanding of microcontroller peripherals and interfaces** including ADC, DAC, I2C, SPI, UART, CAN/CAN FD, RS485, DMA, Ethernet, SD/eMMC, SDIO, etc.
• Strong experience with Automotive communication protocols such as CAN, CAN FD, LIN, J1939 and UDS.
• Knowledge of AUTOSAR concepts and architecture is an advantage.
• Experience with automotive diagnostics, ECU communication, and vehicle network architecture.
• Hands-on experience using Oscilloscope, Logic Analyzer, Function Generator, Multimeter and other debugging equipment.
• Experience in board bring-up, hardware-software integration and debugging of embedded boards.
• Ability to debug power, clock, reset, communication interfaces, and peripheral-related hardware issues at board level.
• Good understanding of schematics, PCB layouts and electronic circuits around microcontrollers and ARM-based systems.
• Ability to work closely with hardware engineers for design reviews, component selection, hardware validation, and issue resolution.
• Experience with prototype board testing, hardware validation, and root-cause analysis of HW/SW issues.
• Experience in reverse engineering and debugging of embedded systems.
• Strong understanding of embedded system architecture and system-level design.
• Experience with Embedded Linux and/or RTOS-based systems is an advantage.
• Knowledge of networking concepts including OSI layers, TCP/IP stacks and common IP protocols is a plus.
• Knowledge of NMEA/NMEA 2000 standards is a plus.
• Exposure to ASPICE, ISO 26262, MISRA-C and automotive cybersecurity is an advantage.
• Experience with automotive development and debugging tools such as Vector CANoe/CANalyzer is a plus.

Roles & Responsibilities:

The right person for this position should have 7+ years of experience in Embedded Systems, preferably with strong exposure to Automotive Embedded Systems.

The candidate should be passionate, technology-driven, and have a strong interest in embedded devices, automotive electronics, IoT, and connected vehicle technologies.

The candidate should be capable of understanding system and product requirements, translating them into technical tasks and solutions, and working as a senior technical individual contributor while collaborating effectively with cross-functional teams.

Work Mode: Full-time, in-person

Reporting To: VP – Software

Job Description

We are looking for a hands-on Technical Lead Engineer to lead the design, development, and delivery of our Head-End System (HES), Meter Data Management (MDM), and Smart Metering platform. The role requires strong backend engineering expertise, deep understanding of smart metering and utility systems, and the ability to guide a development team through architecture, implementation, integration, testing, deployment, and production support.

The ideal candidate will have practical experience building scalable IoT or utility platforms involving smart meter communication, DLMS/COSEM protocols, real-time data acquisition, validation, event processing, command execution, and integration with enterprise systems such as billing, NMS, OMS, and analytics platforms.

Key Responsibilities

• Lead end-to-end technical development of HES, MDM, AMI/AMR, and smart metering modules.
• Design scalable backend architecture for meter communication, data ingestion, validation, processing, storage, and reporting.
• Implement and guide development of DLMS/COSEM IEC 62056 based meter communication.
• Integrate with smart meters, DCUs/gateways, billing systems, NMS, OMS, analytics systems, and third-party utility platforms.
• Lead Java/Spring Boot backend development using REST APIs, messaging queues, socket programming, and distributed system patterns.
• Design high-volume data pipelines for interval data, events, alarms, billing reads, and meter health data.
• Ensure performance, scalability, fault tolerance, database optimization, and reliable production operations.
• Mentor developers, review code, define engineering standards, and guide sprint-level technical execution.
• Work with product, project, QA, deployment, and customer teams to convert utility requirements into robust technical solutions.
• Own technical troubleshooting for production issues, performance bottlenecks, device communication failures, and integration defects.
• Prepare technical documentation, architecture diagrams, API specifications, and deployment guidelines.

Required Skills

• 6+ years of software development experience, including 3+ years in smart metering, HES, MDM, AMI, IoT, or utility platforms.
• Strong hands-on experience with Java, Spring Boot, REST APIs, JDBC/JPA, multithreading, backend system design, debugging, performance tuning, and production support.
• Practical experience with DLMS/COSEM, IEC 62056, Gurux or similar frameworks, smart meter communication, meter reads, events, commands, and remote operations.
• Strong understanding of communication protocols such as TCP/IP, socket programming, FTP/SFTP, MQTT/HTTP, and related integration patterns.
• Experience with Kafka/RabbitMQ, MySQL/MariaDB, MongoDB, Redis, ClickHouse, Apache Solr, or similar messaging and data platforms.
• Knowledge of scalable architecture, including clustering, replication, load balancing, caching, retries, failover, monitoring, and large-scale time-series data handling.
• Experience leading backend engineering teams, owning technical delivery, reviewing code, and mentoring developers.
• Preferred: experience with utility/DISCOM projects, AMISP programs, billing engines, prepaid metering, NMS/OMS, energy accounting, cloud services, CI/CD, Docker/Kubernetes, observability, and cybersecurity for smart metering systems.

Education Requirement

Bachelor’s degree in Computer Science, IT, Electronics & Communication, Electrical Engineering, or a related engineering discipline is preferred. Candidates with strong hands-on HES/MDM, AMI, DLMS/COSEM, IoT, or utility software experience may be considered even with a different academic background.

Job Description – Mechatronics Engineer

Position

Mechatronics Engineer

Experience

2 years

Location

Bengaluru, India

About the Role

We are looking for a hands-on Mechatronics Engineer with approximately 2 years of experience to work on the development and integration of intelligent electro-mechanical systems.

The role involves a combination of electronics system assembly and testing, sensors and actuators, control algorithms, estimation algorithms, embedded implementation, system configuration, and hardware-software integration. The ideal candidate should be comfortable working across the boundary between mechanical, electrical, embedded software, and algorithms.

Key Responsibilities

1. System Assembly & Integration

• Assemble and integrate electro-mechanical systems, sensors, actuators, embedded computers, controllers, and associated electronics.
• Perform wiring, connection, sensor installation, and basic electrical integration.
• Support integration of cameras, IMUs, GNSS, encoders, motors, servos, and other sensors/actuators.
• Configure systems for laboratory, ground, and flight testing.
• Troubleshoot hardware, electrical, communication, and integration issues.

2. Electronics Testing & Validation

• Develop and execute test procedures for electronic and mechatronic subsystems.
• Perform functional testing, sensor validation, actuator testing, and system-level testing.
• Use laboratory equipment such as oscilloscopes, multimeters, power supplies, electronic loads, and logic analysers.
• Analyse test data and identify hardware, firmware, sensor, or integration issues.
• Maintain test records, test reports, and issue/defect logs.

3. Control & Estimation Algorithms

• Implement and integrate control algorithms for electro-mechanical systems.
• Work with PID, state-space, feedback control, actuator control, and related control techniques.
• Implement estimation algorithms such as complementary filters, Kalman filters, EKF/UKF, or sensor fusion algorithms.
• Perform sensor calibration, parameter estimation, filtering, and system identification.
• Tune control and estimation parameters based on laboratory and flight-test data.

4. Embedded Implementation

• Implement algorithms on embedded processors and real-time computing platforms.
• Interface sensors and actuators using protocols such as UART, SPI, I²C, CAN, RS-232/485, Ethernet, etc.
• Develop or modify embedded C/C++ code for system integration.
• Debug hardware-software interaction and real-time issues.
• Support optimisation and deployment of algorithms on resource-constrained embedded systems.

5. Configuration & Version Management

• Maintain configuration of hardware, firmware, software, sensors, and system parameters.
• Maintain configuration-controlled parameter files, calibration data, firmware versions, and test configurations.
• Use Git or equivalent version-control systems for software and configuration management.
• Maintain proper traceability between hardware configuration, software version, test results, and system performance.
• Support controlled release of system configurations for testing and demonstrations.

6. System Testing & Field Trials

• Participate in system-level integration, laboratory testing, HIL/SIL testing, and field/flight trials.
• Prepare test setups and test cases based on system requirements.
• Collect and analyse telemetry, sensor, actuator, and performance data.
• Diagnose failures during integration and testing and work with the engineering team to resolve them.
• Support verification and validation activities for production-grade systems.

Required Skills

• B.E./B.Tech/M.Tech in Mechatronics, Electronics, Electrical, Instrumentation, Mechanical Engineering, or a related discipline.
• Approximately 2 years of relevant industry/project experience.
• Strong hands-on experience with electronics system assembly, integration, and testing.
• Understanding of sensors, actuators, motors, servos, and embedded systems.
• Good understanding of control systems and estimation/filtering techniques.
• Experience implementing algorithms in C/C++ and/or Python.
• Familiarity with microcontrollers, embedded processors, and real-time systems.
• Working knowledge of communication protocols such as CAN, UART, SPI, I²C and Ethernet.
• Experience using laboratory test equipment such as oscilloscopes and multimeters.
• Familiarity with Git and configuration/version management.
• Ability to read schematics, datasheets, interface specifications, and technical documentation.
• Strong debugging and problem-solving skills.
• Willingness to work hands-on with hardware and participate in field/flight testing.

Good to Have

• Experience with UAVs, robotics, autonomous systems, gimbals, or avionics.
• Experience with IMU, GNSS, magnetometer, barometer, encoder, camera, or other navigation sensors.
• Experience with EKF/UKF, sensor fusion, visual-inertial estimation, or inertial navigation.
• Familiarity with MATLAB/Simulink.
• Experience with PX4, ArduPilot, ROS/ROS2, or similar platforms.
• Experience with HIL/SIL testing.
• Basic understanding of real-time operating systems.
• Experience with hardware bring-up and PCB-level debugging.
• Familiarity with engineering standards, configuration management, and structured V&V processes.

Desired Attributes

• Hands-on engineer who enjoys working with both hardware and software.
• Comfortable moving between mechanical assembly, electronics, algorithms, and embedded implementation.
• Strong debugging mindset with an ability to systematically isolate problems.
• Good understanding of engineering fundamentals rather than dependence on pre-built libraries or tools.
• Able to work independently on assigned modules while collaborating closely with multidisciplinary teams.
• Comfortable working in a fast-paced R&D environment involving prototyping, testing, iteration, and field trials.
• Strong documentation and communication skills.

Typical Technology Environment

Sensors & Actuators: IMU, GNSS, magnetometer, encoders, cameras, motors, servos

Embedded: Microcontrollers, ARM processors, embedded Linux/RTOS

Algorithms: PID, state estimation, Kalman filtering, sensor fusion, system identification

Programming: C/C++, Python, MATLAB/Simulink

Testing: Oscilloscope, logic analyser, multimeter, power supply, HIL/SIL

This is a hands-on R&D engineering role suited for an engineer who wants to work on complete intelligent systems rather than a narrowly defined mechanical or electronics function. The engineer will contribute across assembly → integration → algorithm implementation → configuration → testing → debugging → field validation, with particular emphasis on UAV and autonomous-system applications.

About Nexora Group

Nexora Group is a technology-driven organization focused on innovation in Artificial Intelligence, IoT, Embedded Systems, Robotics, and next-generation digital solutions. We provide aspiring engineers with opportunities to gain practical experience, work on industry-relevant projects, and develop skills that bridge hardware and intelligent software systems.

Internship Overview

Nexora Group is seeking passionate and innovative Embedded Systems with AI Interns to join our technology team. This internship is designed for students and recent graduates interested in embedded programming, IoT development, edge AI, robotics, and intelligent hardware systems. Interns will work on real-world projects involving microcontrollers, sensors, AI-powered devices, and automation solutions.

Key Responsibilities

• Design, develop, and test embedded applications for intelligent systems.
• Work with microcontrollers and development boards such as Arduino, ESP32, STM32, and Raspberry Pi.
• Integrate sensors, actuators, and communication modules into embedded solutions.
• Develop and deploy AI/ML models for edge devices and IoT applications.
• Assist in building smart automation, robotics, and intelligent monitoring systems.
• Debug, optimize, and troubleshoot hardware and firmware issues.
• Collaborate with software and AI teams to integrate machine learning into embedded platforms.
• Document project architecture, testing results, and technical specifications.
• Research emerging technologies in Edge AI, TinyML, IoT, and Embedded Computing.

Required Skills

• Basic understanding of Embedded Systems and Microcontrollers.
• Knowledge of C, C++, or Python programming.
• Familiarity with Arduino IDE, PlatformIO, Raspberry Pi, or similar development environments.
• Understanding of electronics, sensors, and communication protocols (UART, I2C, SPI, MQTT).
• Basic knowledge of Artificial Intelligence and Machine Learning concepts.
• Strong analytical and problem-solving abilities.
• Good communication and teamwork skills.
• Passion for innovation and hardware-software integration.

Preferred Qualifications

• Experience with IoT, Robotics, Automation, or Embedded Projects.
• Familiarity with TensorFlow Lite, TinyML, Edge AI, or Computer Vision applications.
• Knowledge of PCB design, circuit simulation, or hardware prototyping.
• Participation in technical competitions, hackathons, or research projects.
• GitHub portfolio or project demonstrations showcasing embedded or AI work.

Eligibility

• Undergraduate or postgraduate students pursuing Electronics & Communication Engineering (ECE), Electrical Engineering (EE), Computer Science, Embedded Systems, Mechatronics, Robotics, IoT, AI, or related disciplines.
• Recent graduates seeking practical industry exposure.
• Candidates passionate about intelligent hardware systems and emerging technologies.

What You'll Gain

• Hands-on experience with real-world Embedded Systems and AI projects.
• Exposure to IoT, Edge AI, Robotics, and Smart Device development.
• Mentorship from experienced engineers and technology professionals.
• Internship Completion Certificate.
• Letter of Recommendation based on performance.
• Opportunity for a Pre-Placement Offer (PPO) for outstanding performers.
• Professional networking and career growth opportunities.