Embedded C Developer

JD For Embedded C Engineer requirements :

Mandatory Skillsets are as below :

1. Embedded SW development background

2. Embedded C/C++/

3. Hands-on experience in RTOS Programming.

4. Working knowledge of SDLC and methodologies/tools for requirement management.

5. Experience working in an agile development environment.

Skill Required

          Technical

• ●  The suitable candidate shall have most of the following knowledge /skills/experience:

• ●  Clear fundamentals of Analog and Digital Electronics. Knowledge of Full Hardware

• Design Life Cycle.

• ●  Knowledge of Circuit Simulation (PSPICE, NI Multisim, etc).

• ●  Hand- On experience with HW designing rules, PCB Layout in Cadsoft Eagle/Altium Designer etc.

• ●  Should have knowledge & experience with designing & developing 8/16 bit Microcontroller based close loop control systems and Arduino Platform.

• ●  Circuit building and Circuit Analysis Skills.

• ●  Component Data Sheet analysis skills.

• ●  Project Requirement Analysis Protocols/Ethernet, Wi-Fi, USB, Serial interfaces(SPI, I2C, RS485, RS422, RS232).

• ●  Hands-on experience in utilizing test equipment like DMM, Oscilloscopes, Logic Analyzers, Function/Signal generator/Solder Station (SMD/DIP).

• ●  Knowledge about Board Bring Up process.

• ●  Testing (Integration testing, protocol/Driver testing, etc.).

• ●  Experience in Embedded C programming and embedded system integration and can develop test cases for the same.

• ●  Knowledge of IoT Open Source Programming / Development.

• ●  Candidate will be responsible for research & development of M2M/IoT products.

• ●  Candidate will be responsible for end-to-end embedded system integration.

   

• Others

  Abilities on the following shall be of added advantage:

• ●  Component Procurement

• ●  Vendor Interaction

• ●  Tools Management

• ●  Costing and resource estimation

• ●  Team management, Good Communication Skills, Pleasant Personality, Positive Attitude & Highly Creative

•  

• Decision level
  Contributory: Makes major contribution to decision or policy judgment on Technical matters of IoT/ M2M Projects, Vending Machines

  Demonstrate (Key competencies)

  Healthy knowledge of most of the following:

• ●  Embedded C

• ●  8/16 bit Microcontrollers

• ●  Atmel Studio/ Arduino IDE

• ●  Schematic / PCB layout design in Cadsoft Eagle / Altium Designer (SMD/DIP)

• ●  Hands-on experience on Test equipment and solder stations (SMD/DIP)

• ●  M2M / IoT based development

• Firmware Design and Development experience on different micro-controllers.
  
• C/C++ programming
  
• Linux Commands Operating System Concepts
  
• board bring up, embedded software, Kernel Build, Yocto
  
• Shell scripting Networking Concepts Openwrt OS Concepts
  
• Must have good Communication and Presentable skills.
  
• Experience on any Wifi, Bluetooth, GSM modules is a plus.
  
• Design, develop, code, test and debug system software.

StartUp engaged in inventing and innovating Smart Energy Meters and related Technologies (OEM) requires Embedded Engineers. Following re-innovation principle and Technology First direction, we design Technologies to deliver our Vision of the highest Quality Products and Technologies. The candidate's responsibilities include IoT (COSEM/DLMS), technology integration. Required skills include Embedded C and C++ and knowledge of Electrical and Electronics.

Develop, design, and implement embedded applications.

· Prepares appropriate documentation as required by internal product development processes

· Conducts and participates in design, code and test reviews and inspections, as well as the feasibility, efficacy and compliance to functional and regulatory standards.

· Works closely with the software team, the software verification team, the functional manager and the project manager.

· Collaborates with distributed, cross-functional teams to ensure products meet quality, performance, scalability, reliability and schedule goals.

· Investigates software, hardware, and system problems using a variety of techniques and provides innovative solutions.

· Conduct and participate in reviews and inspections for all elements in the firmware lifecycle to ensure that our code quality and customer satisfaction goals are achieved

· Integrate and validate new product designs

· Provide post-production support

Skill Sets:

• B.Tech. / M.Tech. (any stream)

· Good knowledge in firmware development field with more than 3 years of experience

· Basic knowledge of software life cycle, algorithm and data structure.

· Excellent knowledge of OS, coding techniques, IP protocols, interfaces and hardware subsystems

· Adequate knowledge of reading schematics and data sheets for components.

· Ability to understand the electrical schematics and work closely with electrical team.

· Experience with Real Time Operating Systems and Embedded Linux.

· Mode of network connectivity - good idea about GSM/GPRS, Wifi, Ethernet mode of connections. TCP, MQTT, HTTP mode of connection will be a big plus

· Protocols Like UART, SPI, I2C, CAN, MODBUS, TCP/IP, USB, Bluetooth.

· Experience in modules like Wi-Fi, BLE, Lora WAN, ZIGBEE, RF etc.

· Should have experience in working with TFT and LED displays.

· Extensive experience in micro-controller/microprocessor (like ARM Cortex M, ESP32, STM Chips, NXP, BeagleBone , ESP chips, BeagleBone black, STM Chips, Atmega chips etc.)

· Familiarity with software configuration management tools, defect tracking tools, and peer review (GIT, SVN)

· History of driving project execution and timely delivery while ensuring a quality focus.

· Experience writing / interfacing with device drivers.

· Experience in Agile development processes and philosophies.

· Strong documentation and writing skills

Mandatory Skills:

· Basics of embedded system development

· Embedded C/C++

· Scripting Lang - Python

· Basics of wireless communication

· RTOS

· Strong Problem-Solving Skills

· Analytical Skills (Good Aptitude)

· Communication Skills

 Job Description: Senior Software Engineer- Embedded Systems

Videogram is looking for Software Engineer in Embedded Systems who will be responsible for designing the embedded systems and installing them in machines and tools. You will be playing an important role in our software team who will be responsible to design and develop the software that controls the processor (micro-controllers and digital signal processors) of the machine. You come with a role as a professional Embedded System Software Engineer to execute a complete embedded software development lifecycle.

Responsibilities:

• Design and implement software of embedded devices and systems from requirements to production and commercial deployment. Responsible for the complete embedded software development lifecycle
• Design, develop, code, test, and debug system software
• Coordinate with the engineers from other disciplines to develop the end product of the requisite standards
• Customize the software to suit the needs of the product nature and expected functioning
• Debug the system to remove the anomalies and inconsistencies

Requirements:

• Candidates require a bachelor's degree in computer science, electrical engineering, software development, embedded software, etc. 
• The candidate should be an undergraduate in Computer Science or a relevant field
• Hands-on experience in C++11 or later programming languages
• Knowledge of GIT Version control
• Experience in doing bare metal or RTOS development
• Hands-on experience in developing the code in Linux
• They require exceptional programming skills and competence in using software tools. 
• Knowledge of operating systems and of the interaction between hardware/software is important for this profile. 
• The attributes of problem-solving ability, analytical skills, proactive behavior, and an adaptable approach are important in this position. 
• This discipline of engineering provides scope for creative minds and poses challenges to perform quality work.
• Scripting in Python & Bash is an add-on
• Experience in any of the following technologies:

           UART | SPI | I2C |MIPI DSI |Display Port | Low-Level Sata

Additional/ Desirable Interests:

• Personal interest in videography/ photography and audio production
• Experience working programmatically with videos/ images/ audio
• Exposure to low-level details of any video/ image codecs
• Exposure to movie container file formats especially QuickTime/mp4
• Working knowledge of exFAT file system