DPDK developer - good funded start-up

About Statcon Electronics 

Statcon Electronics India Limited Statcon Electronics India Limited is a company specializing in the field of power electronics since its inception, with its roots going back to 1986. It has held prestigious clientage both nationally and internationally, with ABB, Alstom, BHEL, Indian Air Force, Indian Army, Indian Railways, GAIL, and Indian Oil, to name a few. SEIL has a diverse portfolio, spanning across 4 sectors – Railways, Power, Defence and Solar energy.  

About the position 

We are looking for a multiple embedded software engineers with experience in developing firmware for controlling power electronics systems. Openings are available for senior and principal engineer positions across multiple product streams, and target markets include the Indian subcontinent, Africa and North America. 

Required Technical skills 

• Demonstrated experience in developing embedded firmware for real-time power electronics systems using 16/32 bit ARM microcontrollers (ST Microelectronics preferred).  
• Must have shipped at least 1 major relevant product to the market which meets standard industry specifications. Experience with designing for North American/European markets a plus. 
• Experience with common communication protocols such as SPI, I2C, USB, UART, Bluetooth, Ethernet, RS232, and RS485 
• Experience with peripherals and systems such as ADC, DAC, timer, GPIO, PWM, DMA, NVIC, serial and parallel interfaces, memory, bootloaders and watchdog timers 
• Proficiency in advanced algorithm development using Embedded C 
• Experience with embedded software tools such as editors, assemblers, compilers, debuggers, simulators, emulators and Flash/OTP programmers. 
• Thorough understanding of power electronics topologies and control strategies 
• Good grasp over digital signal processing techniques 
• Ability to read and interpret component datasheets, PCB schematics and layout design 
• Familiarity with using measurement devices such as oscilloscopes, multimeters, function generators and logic analyzers to bring up and debug hardware 
• Demonstrated knowledge of firmware development best practices (code reviews, unit tests, Software Configuration Management, version control using git etc.) 
• Excellent documentation skills, and a good grasp over the English language 
• Comfort in using modern collaborative tools such as Slack/Microsoft Teams, JIRA/Trello/Microsoft Planner, Confluence/Microsoft OneNote and the like. 

Bonus Technical skills 

• Experience using at least one scripting language, preferably Python 
• Experience with designing for North American/European markets 
• Experience with designing for IEC and BIS standards 
• Familiarity with EMI/EMC process 
• Ability to simulate power electronics systems using Simulink/MATLAB or equivalent open-source tools 
• Familiarity with agile software development processes 
• Experience with Linux administration using command line 

Soft skills 

• Ability to mentor junior engineers and generate testing procedures for people of all skill levels 
• Excellent inter-personal skills 
• Strong attention to detail with the ability to work on tight deadlines 
• Team player with the ability to work independently under minimal supervision 
• Excellent problem-solving skills 
• Ability and desire to learn new technologies quickly 

Qualifications 

• Junior Engineer: A Master's (preferred) in Electrical/Electronics/Computer Engineering with 1 year of industrial experience, or a Bachelor's with 3 years of relevant industrial experience. 
• Senior Engineer: A Master's (preferred) in Electrical/Electronics/Computer Engineering with 4 years of industrial experience, or a Bachelor's with 6 years of relevant industrial experience. 
• Principal Engineer: A Master's (preferred) in Electrical /Electronics/Computer Engineering with 8 years of industrial experience, or a Bachelor's with 10 years of relevant industrial experience. 

Responsibilities 

• Develop, implement and test cutting-edge algorithms for medium and high-power AC-DC, DC-AC and AC-AC conversion of 1 phase and 3 phase AC systems up to 440 V AC, and DC-DC conversion of systems up to 1000 V DC. 
• Develop sensing and IoT solutions for power electronics embedded systems 
• Convert product requirements into technical specifications for Indian and international markets 
• Cover all stages (pertaining to firmware) of V model for product development 
• Generate technical documentation describing product functioning and test procedures for hand-off to SQA 
• Debug product failures in the field using data-driven analysis techniques 
• Mentor junior engineers 
• Host research talks on emerging technologies within the company 

Statcon Electronics is an Equal Opportunity Employer and considers applicants for all positions without regard to race, color, religion or belief, age, marital status, military/veteran status, genetic information, sexual orientation, gender identity, physical or mental disability or any other characteristic protected by applicable laws. Statcon Electronics is committed to creating a dynamic work environment that values diversity and inclusion, respect and integrity, customer focus, and innovation. For more information, visit www.sindia.co.in. 

WheelsEye is India's leading SAAS-based platform in formulating the next tech-enabled logistics revolution. We offer technology that connects truck fleet owners & SMEs and helps them to automate operations, secure fleets, save costs, improve on-time performance, and streamline their business.

We have a young and energetic team of IITs, NITs, IIMs & top B-Schools employees serving PAN India. We go to great lengths to hire the best talent who are deeply aligned with our values.

We at WheelsEye, believe in fostering a sense of intrapreneurship, promoting team bonding, and creating a positive and friendly work culture where you will feel valued and motivated to do the best work.

Role:- Senior Firmware Developer

Requirements

Core skills: 

• Proficiency in programming, specifically Embedded C and C++
• Understanding of Hardware components (Sensors, MCUs, Actuators, Antenna)

Core Experience

• Over 4 years of hands-on experience in Embedded Systems
• Prior experience in building IOT Gateway
• Previous experience in designing FOTA
• Previous experience in the telematics/DMS would be advantageous
• Teamwork

Summary: 

Hyperspec is building a real time local map for self-driving cars and using cross view localization to enable ubiquitous autonomy. Hyperspec is a VC funded startup.

The principal embedded systems engineer will have deep expertise in embedded systems design, development and worked for years on embedded systems teams. This person is a leader and mentor to junior engineers and shares knowledge about the design and development of embedded systems.

Responsibilities:

• Serves as an expert in all aspects of embedded projects and embedded systems—including designing, developing, testing, and perfecting designs 
• Responsible for updating and working with executive leadership on the development of embedded systems and status of projects 
• Provides guidance and mentoring to other members of the team

Requirements:

• Minimum of bachelors' degree in computer science or engineering
• At least ten years of engineering experience with expertise in software engineering, data structures, and programming techniques
• Deep expertise in C/C++ programming
• Experience with FPGAs, PCB, Xilinx, Altera, or similar SoCs.
• Experience with ISPs, Cameras, Switches a plus.
• Experience in working with real-time operating systems, communications protocols and firmware design.

• Experience in interfaces, IP protocols, and hardware subsystems.
• Experience in working as part of a team and leading teams.

You would be part of:

1. Designing/Improvement of new/existing architectures of distributed computing with subcomponents of Unmanned Aerial Systems (UAS).
2. Working/Researching with industrial state of the art sensor systems and modules, and developing drivers (HAL or wrapper) and applications around their usage.
3. Design and implementation of communication protocols between different subcomponents of UAS for distributed computing.
4. Writing Applications and Drivers from the scratch for (embedded)linux based systems.
5. Scripting and automations around work flows of UAS usage.
6. Working with existing sophisticated software stacks of subcomponents of UASs.
7. Working closely with electronics, design and systems teams for architecture development and deployment.
8. Working closely with Flight Controller engineers to do collaborative development of UAVs.

We expect you to be:

1. Experienced in hands-on development of complex embedded systems involving multiple microcontrollers or SoCs.
2. Very good in analytical abilities to be able to do core research and development activities.
3. Able to write low level drivers (wrapper or core) from the scratch.
4. Very comfortable reading and understanding datasheets and reference manuals of microcontrollers, peripherals, sensors etc.
5. Able to understand existing complex embedded software stack written in C/C++.
6. Solid in C.
7. Good in C++.
8. Comfortable with using hardware debuggers.
9. Having Hands-On experience with RTOS concepts like scheduling, threads synchronicity , race conditions etc.
10. Having Solid understanding of interrupt mechanisms.
11. Experienced in working with different hardware protocols like SPI, I2C, UART, PWM, CAN, USB etc.
12. Having Solid understanding of interrupts architecture of ARM based microcontrollers like STM32, LPC etc.
13. Having Good understanding of the concept of bootloaders.
14. Able to multitask.
15. A self-motivated and motivating personality who can work well independently as well as part of a team
16. Having good interpersonal and soft skills who can adapt to the work environment while manifesting a good positive attitude

You are awesome if you are:

1. Experienced in Linux Device Driver development.
2. Having good exposure of working on and understanding of any sensor modules like GPS, LIDAR etc.
3. Experienced in data filtering techniques (Example: Kalman filter)

Build new features, enhance existing functionality and fix issues in the Windows Desktop application.

Help develop and maintain UI component library (Windows, dialogs , complex widgets)

Advise and assist the other developers in the Desktop.

Skills required

1. Very strong programming skills in UI development using Qt/C++
2. A strong ability to think about components and modules as they relate to other components as part of a larger system.
3. QML knowledge is a plus
4. Cross platform application development knowledge is a plus, not mandatory
5. A very strong attention to detail and the willingness to deliver pixel perfect UI according to the designs.
6. Must have: Very strong in ModelView architecture
7. Must have : In-depth C++, STL, and data structures knowledge

Desirable : Familiar with unit test frameworks like QtTest or Gtest

Desirable : Experienced with Agile methodology

Desirable : Knowledge in GIT or any other config management tool

Good understanding of object oriented techniques methodologies.

Good hands-on experience of C++ system programming and design.

Key Skills

C/C++, Qt, STL, Design, QML

Experience In product development is good to have

QUALIFICATIONS: B.E./ B.Tech. (Electronics/ Electrical/ Mechatronics/ Mechanical)

EMPLOYMENT: Permanent / Full Time

LOCATION: Ahmedabad

EXPERIENCE: 1 to 3 years within automotive industry / software development.

ROLES AND RESPONSIBILITIES

• Develop, Debug simulink/stateflow models according to functional, technical requirements, MAAB guidelines.
• Derive software requirements from system level requirements and establish bi-directional traceability within the models and generated code.
• Generate Code from developed models, generate test vectors, automate tests and document code reviews, test results.
• Automate the data exchange flow between MATLAB models, excel sheets, code testing using m-scripts.

SKILLS AND EXPERIENCE

• Experience in model based development and testing using Mathwork Tools such as MATLAB/Simulink, Stateflow, autocode generation tools Embedded coder or TargetLink.
• Good understanding of the Automotive software development cycle and tool chains
• Should possess a good understanding of C coding, m-scripting, with good debugging and software testing skills.
• Experience in developing MATLAB/ Simulink models from scratch for automotive applications.
• Should have experience in requirements management, and be able to write test cases from them.
• Experience in MBD testing such as MIL/ SIL/PIL.
• Good communication skills in English and Hindi Language.
• Experience in MATLAB verification and validation toolbox like Simulink Design Verifier, Simulink Test, Simulink Coverage is advantageous.
• Basic understanding of Control System Design and Electric Vehicles is a plus.

What you need to have:

Develop firmware, system software for medical devices\ Automotive ECUs\ IoT edge devices & gateways.  Implement the logic and protocols and communications on 32-bit microcontrollers, configure OS, timers, tasks, interrupts, and communicate with external modems, SoCs, trans-receivers to design, code, and test desired functionality as per customer requirements

Job Requirements :

• Hands-on experience in firmware development using C language
• Hands-on experience in writing low-level device drivers for microcontrollers
• Know of real-time Operating system concepts, tasks, and interrupts’ configuration
• Hands-on experience with in-circuit debuggers
• Knowhow of wired and wireless communication protocols 
• Basic understanding of HW circuits, power supply designs, sensors, and actuators’ interfaces
• Experience in implementing SW development quality processes like ISO 9001 or ASPICE
• Good written and oral communication skills

• Product and Application Development in C.
• Develop and debug Applications and Firmware in/for Embedded Linux Environment
• Design and development of real-time, multi-processor / multi-controller systems.
• Module-level design with proper software design practices

Required Qualifications:

• 4+ years of C development AND Linux experience
• Linux user space and kernel space programming experience
• Linux system programming
• Work experience with 8 / 32-bit microcontroller programming
• Experience with CAN, MODBUS, and high power systems software development.
• Source revision control (git, svn)
• Degree in Computer Science from a reputed institution
• Linux command line and development tools (e.g. shell script, Make, CMake, GDB, and GNU development tools)

Preferred Qualifications:

• Exposure to a full product development cycle.
• Programming experience in an object-oriented language (C++)
• Programming experience in a high-level language (e.g. Python)
• Knowledge of common Linux system calls, kernel interfaces, Linux device drivers, and configuration.
• Exposure to multi-processor product architecture.
• Experience in open source components and libraries (e.g. libxml, glib, qt, dbus, OpenSSL, curl, etc)
• Experience with Level2 AC EV chargers and/or DC fast chargers.
• Experience OR Knowledge with standards ISO 15118-2
•  Add "8 bit / 16 bit / 32 bit microcontroller experience, specially ARM"