Senior MCAL Engineer

Key Responsibilities

• Maintain and enhance the Yocto BSP for the TechNexion PICO-IMX6 DualLite (NXP i.MX6) platform.
• Assess and execute migration from Yocto Zeus to a newer LTS release (e.g., Dunfell/Kirkstone).
• Integrate stable Linux kernel patches from NXP and mainline.
• Optimize system boot time, startup sequence, and overall performance.
• Remove unnecessary services and packages to reduce image footprint.
• Update and stabilize the Bluetooth stack (BlueZ and firmware).
• Optimize Linux kernel configuration, power management, and CPU tuning.
• Debug CPU, memory, storage, and I/O performance issues.
• Maintain Yocto layers, build process, and technical documentation.
• Define and maintain eMMC/SD storage layouts for boot, rootfs, data, and update partitions.

Required Skills

Mandatory

5+ years of Embedded Linux development experience.

2+ years of hands-on Yocto Project experience.

Strong expertise in:

• Yocto (recipes, meta-layers, BitBake, bbappend)
• Linux kernel configuration and patching
• NXP i.MX6 or similar embedded platforms
• Systemd optimization and boot profiling
• Embedded Linux debugging (dmesg, perf, ftrace, systemd-analyze)
• BlueZ and Bluetooth bring-up
• Cross-compilation, toolchains, and Git workflows

Preferred

• Yocto LTS migration experience.
• U-Boot optimization.
• Embedded power optimization.
• Secure Boot and OTA update concepts.
• Exposure to Qt-based embedded systems.

Key Deliverables

• Optimized and maintainable Yocto BSP.
• Reduced system boot time.
• Lean system image with redundant services removed.
• Stable Bluetooth stack with updated patches.
• Updated Linux kernel with critical fixes.
• Documented Yocto layers and build process.
• Migration plan for the latest Yocto LTS.
• Defined storage partition layout for deployment.

Experience: 5+ Years in Embedded Linux (Minimum 2+ Years with Yocto)

Roles and Responsibilities:

• Strong experience with programming microcontrollers like Arduino, ESP32, and ESP8266.
• Experience with Embedded C/C++.
• Experience with Raspberry Pi, Python, and OpenCV.
• Experience with Low power Devices would be preferred
• Knowledge about communication protocols (UART, I2C, etc.)
• Experience with Wi-Fi, LoRa, GSM, M2M, SImcom, and Quactel Modules.
• Experience with 3d modeling (preferred).
• Experience with 3d printers (preferred).
• Experience with Hardware design and knowledge of basic electronics.
• Experience with   Software will be preferred.ss

Detailed Job role (daily basis) done by the IOT developer.

·       Design hardware that meets the needs of the application.

·       Support for current hardware, testing, and bug-fixing.

·       Create, maintain, and document microcontroller code.

·       prototyping, testing, and soldering

·       Making 3D/CAD models for PCBs.

Hello,

This mail is regarding for the positions of Embedded Application Development (Automotive domain). Check the client details and job description mentioned below.

If you are interested please respond back and revert to me.

• Role : Embedded Application Development
• Location : Hyderabad
• Fulltime.

Job Description :

NOTE: Pls look for candidates somebody who can take up the L1& L2 in this week itself.

Hand on experience in Automotive Embedded Software development using Embedded C

· Hand on experience in Microcontrollers

· Hands on experience in ClearCase or any configuration management tool will be added an advantage.

· Good in Autosar will be added an advantage.

· Knowledge on MISRA standards and tools

· Knowledge on Functional safety concepts, ISO 26262

· Good Experience of software development lifecycle

· Knowledge of the performance of reviews and review-techniques

· Good communication skills as well as the ability to work in a team.

As we discussed, please reply that you confirm the submittal to the client ZF for Embedded Development.

Full Name (First Name & Last Name)

Contact#

Email id

LinkedIn

Notice Period

Current Location

Willing to Relocate

Education

Current Company

Skill

Broad Skill

Total Experience

Current CTC

Expected CTC

References:

• Firmware Design and Development experience on different micro-controllers.
  
• C/C++ programming
  
• Linux Commands Operating System Concepts
  
• board bring up, embedded software, Kernel Build, Yocto
  
• Shell scripting Networking Concepts Openwrt OS Concepts
  
• Must have good Communication and Presentable skills.
  
• Experience on any Wifi, Bluetooth, GSM modules is a plus.
  
• Design, develop, code, test and debug system software.

Hands-on experience in Autosar methodologies and workflows.

• Sound understanding of embedded SW development using C on 32/64 bit microcontrollers.

• Experience in at least one of microcontroller architectures: Renesas RH family, Tricore or PowerPC architecture.

• Automotive Product Development Process knowledge (ASpice, ISO26262)

• Experience in one or more of Autosar BSW Modules stacks.

• Autosar based SWcs development in any domain of cluster, ADAS and IVI system.

• Com stack (FlexRay, CAN, LIN, Ethernet) / Memory Stack/ Diagnostic stack/ OS, Wdg, other services.

• Working knowledge on AUTOSAR ECU software architecture

• Understand the various features provided by AUTOSAR BSW modules and configure BSW modules in Davinci Configurator or similar tools

• Understand the AUTOSAR application (SW-C) configuration and the interaction of AUTOSAR applications (SW-C) with the underlying BSW modules

• Understand the functionality of RTE, mapping of application entities with BSW module parameters, OS scheduling concepts, ECU and BSW module state changes

• Understand the AUTOSAR methodology (ECU extract contents, import of ECU extract into configuration tool)

Understand the flow of the AUTOSAR software from application till the underlying driver.

• 32-bit Microcontroller knowledge is essential (ARM Cortex based micro-controllers (STM32).
• Esp32 architecture knowledge is essential.
• Strong experience in C, C++, Free-RTOS
• Strong experience in CUBEMX IDE, MDK Version 5 – Keil, Arduino IDE environment
• Good knowledge in HW and communication protocols like CAN, SPI, UART, I2C, USB 
• Good knowledge in TFT Displays and Sensors is added advantage
• Good knowledge of implementation of motor controls as required, pulse width modulation schemes (PWM).
• Good knowledge of power electronics (TRIACs, MOSFETs, IGBTs, gate drivers) and require protections (Over/under voltage/current).
• Document firmware designs, specifications, test plans, revisions and produce test reports

Developer Software (Embedded)

Location: Udaipur

Qualification: BE in (Electrical/Electronic Engineering)

Technical

· Experience in design and development with structured Software Development Life Cycle for embedded applications

· Proficiency in C language or assembly programming, Microcontroller, Micro Processor.

· Preferably experience in working and understanding the metering domain

· Proficiency in development processes, tools/IDE (KEIL, IAR, Eclipse) & test automation

· Unit testing skill

· Interface RS485, RS232, SPI, I2C, USB, LCD, Keypad, Flash, EEPROM

· Coding Standards and MISRA rules are preferable

· Knowledge of ARM / MIPS / Coldfire / MSP430 / dsPIC / 8051 and other popular processor

· Experience in working on communication products based on GPRS, ZIGBEE, ZWAVE, Ethernet, Power line communication, DLMS, MODBUS

Job Description

· Understand improvement requirements and develop improvement solutions & package, according to technical specifications / high-level solution design

· Responsible to carry out effective and timely unit testing, in order to, deliver first time right solutions

· Development of automation framework/compiler / emulators to speed up business delivery cycle in NPI programs

· Keep track of new trends, continuously learn and self-develop skills by ensuring effective knowledge sharing through group meetings and training. Impart training to new joiners as and when assigned

· Proficiency in developing embedded software design with high reusability using relevant tools and BSM or flow diagram

Summary:

The embedded systems engineer designs, develops, tests, and maintains embedded systems. The engineer will identify and fix issues and work collaboratively with engineers, product managers, and others on various teams. 

Responsibilities:

• Design and build embedded systems, including embedded system firmware
• Test and debug the systems
• Monitor and maintain the system after development
• Improve system efficiency and stability after development
• Collaborate with customers to create systems based on their needs

Requirements:

• Minimum of a bachelor's degree in computer science or engineering
• Professional experience in embedded systems
• Significant programming experience in C or C++
• Experience in trouble-shooting embedded systems and microcontroller peripherals
• Experience in working in real-time operating systems
• Experience in interfaces, IP protocols, and hardware subsystems
• Proficiency in working with common embedded systems communication protocols
• Strong interpersonal and writing skills
• Ability to work as part of a team
• Exceptional analytical and problem-solving skills
• Self-motivated and passionate about your work and embedded systems
• Always eager to learn and improve