SAP ABAP

C, C++ , Linux , Device Driver , Linux Internals ,

Processor knowledge like Arm , Intel , Protocol SPI , I2C . Networking experience,

L2 protocols knowledge, knowledge on Python/Perl ,

Broadcom DNX/XGS device experience is desirable,

Interested to learn New things,

 

C,C++, LINUX INTERNAL OR IPC, LINUX OS CONCEPTS, DEVICE DRIVERS,

 

PROCESSOR KNOWLEDGE

 

SCRIPTING KNOWLEDGE EIHER PYTHON OR PERL

 

What You Will Do :
Candidate shall be responsible for the overall quality of the module that he/she is responsible
Candidate shall be responsible for requirement elicitation and architecture of the module for instrument cluster in a production program
Candidate shall help the PM/architect in estimation

What You Need :
Expertise in C++ for more than 6 years
Experience in Automotive is preferred
Understanding of CAN/LIN protocol
Experience with unit testing tool (GTest/ LDRA etc.)
Experience in design tools like Rhapsody is desirable

Position: Senior Hardware Engineer

Requirement: Immediate joining

Job Description for the above position:

➢ 5 to 7 years of experience in high-speed and Mixed-signal product design and development.

➢ Hands-on experience in circuit design and circuit simulation, an excellent skill set is a must in circuit analysis.

➢ Experience in Industrial/MIL grade environmental system design, in which processor-controlled and FPGA-controlled devices are involved.

➢ Excellent component selection and decision-making skills.

➢ Working experience with high-speed digital interfaces such as PCI Express, DDR3/4 SDRAM, 100Mbps/1000Mbps/10Gb Ethernet, Battery management system and USB2.0/3.0. This is must

Requirement.

➢ Experience in a range of technologies including digital, analog and power electronics.

➢ Hands-on experience in writing low-level design documents, architectural design documents and test procedures is a must to apply for this position.

➢ Excellent knowledge of electronic circuits and analysis.

➢ Familiarity and Experience with Altium Designer and Allegro tools.

➢ The ability to work with software engineers to design and debug systems.

➢ Experience in Thermal analysis, Load analysis and Timing analysis.

➢ Knowledge of Signal integrity and power integrity.

➢ Experience in system-level design, logical design etc.

➢ Experience and involvement in the complete cycle of Product development and design skill is a must requirement for this position.

➢ Good knowledge of EMI/EMC testing procedures and Certification standards.

➢ Guide and support all aspects of PCB layout, fabrication, and assembly processes.

➢ Knowledge of analog and digital video interfaces, especially HDMI, Display Port, and SMPTE

video standards a plus.

➢ Hands-on experience in design/troubleshooting/updating hardware.

➢ Thorough knowledge of MS Office applications, Word, Excel, and Visio.

➢ Mentoring the team, being an individual contributor, willingness to take ownership of the design is a must to apply for this position.

➢ Experience with testing tools like Oscilloscopes, Signal Analyzers etc...

➢ Strong knowledge on layer stack-up build.

Qualification:

 

➢ BE/B. Tec or ME/M. Tech in Electronics/Electronics and communication Person 

Specification/Competencies: 

➢ Self-motivated 

➢ The ability to work independently, within or lead the team. 

➢ Well organized 

➢ Strategic thinker. 

➢ Proactive 

➢ Ability to manage multiple tasks and work toward long-term goals. 

➢ Excellent communication skills (verbal and written) 

➢ Solid understanding of engineering fundamentals and technical problem-solving skills. 

➢ Experience in establishing and sustaining strong relationships with the extended team.

Experience – 8 – 10 years

Location - NCR

Roles and Responsibilities:

System Analyst

The individual in this role will gather, document, and analyze client functional, transactional, and insurance business requirements across all insurance functions and third-party integrations. System Analyst will also work within a cross-functional project team to provide business analytical support and leadership from the business side.  The individual will play a highly visible, client-facing, and the consultative role and have the ability to offer system solutions to enhance client implementations and transform client workflow and business processes. Individual should be very good in mapping business functions / attributes with the Insurance rules and data.

 

Skills Required:

• A successful candidate in this role must:
• Good hands-on skills in Oracle, PL/SQL, TSQL
• Object oriented knowledge should be good
• Have Functional knowledge on P & C
• Overall Tech - 60% and Functional - 40%

 

Primary Skills:

• Good Data Mapping knowledge, RDBMS / SQL Knowledge

Secondary Skills:

• Oracle Big+

Required Skills:
Must have Windows desktop application development experience.
Must have WPF experience.
Must have C# .Net experience.
Strong problem-solving, trouble-shooting, and communication skills.

Role: Functions Developer (Embedded c - Algorithm / Driving Functions Development)

Location: Hyderabad

Duration:Fulltime
Job Description:

• Design and development of automotive feature/function software/components (ACC, AEB, TSR, LKA etc.) for ADAS/AD systems
• Coordination and regular interaction with different stakeholders and teams like testing, requirements, leads etc.
• Participate in SW requirement generation, SW architecture, detailed design etc.

 

Requirement:

• 3-7 years of experience in development of Algorithm & Functions for advance driver assist systems (ADAS), Autonomous driving (AD)
• Development experience with safety critical systems
• Experienced in development using MATLAB Simulink, TargetLink, Stateflow
• Experience in modelling and validation of control systems
• Knowledge of SIL, Performance Test, Functional testing
• Embedded software development using C, C++
• Issue management and version control
• Knowledge of ASPICE processes, Static analysis, MISRA checks etc.
• Strong written and verbal communication skills
• Proactive approach for problem solving

 

Good to have:

• Knowledge of ADAS/AD functions (ACC, TSR, AEB, LCA etc), Data Analysis
• Experienced in managing and authoring of function specification requirements
• Familiarity with AUTOSAR RTE

 

Nice to have:

• AUTOSAR, Functional Safety (ISO26262) exposure
• Scripting Knowledge - Python, MATLAB
• Working knowledge of automotive protocols like CAN, Ethernet etc.

 

 

 

 

 

 

Responsibilities and Duties
The team leader will be leading a team of Hardware engineers, firmware and testing engineers. Being a team leader, you will primarily be responsible for fast and accurate delivery from the team which might even include handholding of team members whenever needed. Embedded team would be responsible for the following:
Hardware Design including

• Circuit design as per design requirements
• Schematic capture in the tool
• CAD layout
• QA/QC/functional testing
• PCB assembling and rework
• Lab inventory management
• Component procurement.

Firmware Design Including

• Firmware Design and architect
• Software Development
• Firmware Testing
• Code management over svn

Other Responsibilities

• The team leader would also be responsible for architecting the system, creating detailed design documents as per requirement and maintaining quality control of all the deliverables.
• The team leader would also be required to create a detailed test plan and list of test cases to be executed and if needed, create proper environment for the same.
• Ownership of the ‘ground up’ design and architecture of embedded software for real time applications.
• Decomposition of designs in to structured modules/functions ready for implementationby yourself and the team.
• Hands on development in C of new ARM based embedded software for a range of products currently under development
• Ensure quality of software using appropriate methods(Code Review, Static Analysis, Unit Test etc.) and application of suitable Coding Standards
• Maintain, update and enhance existing embedded software written in C
• Documentation of software products, development and execution of test plans
• Work closely with other members of the engineering team to assist with the correct choice of processors and supporting hardware

Required Experience, Skills and Qualifications

• Experience of 8+ years in field of embedded systems designing and developement.
• Familiar with usage of various LAB instruments.
• Strong fundamentals of electronics (Digital and analog) are must.
• Well versed with circuit designing and HW debugging
• Analog and Digital Circuit designing: familiarity with micro-controllers, memories, communication interfaces, op-amps, comparators, relays, inductors and capacitors, Handling EMI and Noise issues associated with circuits.
• Understanding of BLE protocols will be required.
• Understanding of scientific methodologies of experimentation, data-gathering and interpretation and hypothesis.
• Understanding of basic architecture, debugging of sensors.
• Experienced in embedded-C coding, memory allocations.
• Experience with any RTOS designing preferably with FreeRTOS at least with Semaphores, SW Timers, synchronisation and event handlings, task handling and prioritization.
• Understanding of micro-controller architecture, programming and debugging methodologies, interrupt-handling.
• Experience with any of the IDEs and debuggers for ARM architecture.
• Basic understanding of assembly programing of ARM architecture
• Understanding of basic peripherals like UART, CAN, I2C, Timers, Counters, PWMs, ADCs, DAC.
• Experience/knowledge in IoT devices (sensor, gateway, cloud) handling.
• Familiarity with CAD tools for schematics and layout generation.
• Experience on MS-Office.
• Familiarity in understanding and creating various test plans and documents.

General Skills Needed/ Requirements:

• Strong knowledge of components and should be able to suggest the team with right componenet
• Candidate must have a knack to use his/her technical knowledge to give it back to society.
• Candidates passionate to bring a change in society will be preferred with no compromise on pay check.
• Candidates must be open to work with communities to get feedback on product features so that products are best fit for social upliftment.
• Candidates must be open to travel to needy communities and should not hesitate to get his/her hands dirty to bring a change to the communities.
• Candidates must find associated with the cause and mission of the company.
• Open to work in open startup culture and give his/her 100%.
• Analytical reasoning and fact-based brainstorming capabilities will be highly preferred.
• Ready to relocate to Gurugram.
• Occasional field visits.

Benefits of choosing us…

• Growth Opportunites (Our first priority is a team) 
• Paid Overtime (125%), Incentive, Bonus & Gift Provision
• Very Flexible & Friendly work environments
• Work-life balance (taking leave, office timing, *working from home)
• Growth Opportunites (Seriously, We believe in WIN-WIN)
• Months last week (Restaurant, Movies, Fun Activities)

OmnixOne is a Research and Development company, our vision is to create a world free of resource scarcity, so people can have more time for innovation/big things instead of fighting daily life problems. Wanna be part of this great journey, Come with us!

Prerequisites

• We are looking for a person who is really interested in & enjoys technology, is Passionate about Innovation, and Can go the extra mile for perfection.
• Behavioral Attitude: Must be a Quick learner / Highly Dedicated / Responsible person

Require Person: 5

Job Type: Full-time

Office Timing: 9:30 to 6:30

Expected Start Date: ASAP

Fresher Salary: 3,000 to 15,000

Experience Salary: 10,000 to 45,000

Location: Must be from Surat, Gujarat

Below are the skills we are looking for in a candidate.

• Strong hands-on C/C++, Embedded System Development 
• Hands-on experience on ESP-IDF, STM32CubeMX, Embedded Linux, RTOS
• Good to have Python, Shell/Bash Scripting, Toolchains
• SPI, I2C, UART, RS485, CAN, and hardware subsystems
• Hardware and IoT / IT Communication protocols knowledge
• Problem-solving and analytical skills.
• Familiar with Standards (SOLID Principles, OOPs, Misra C, etc)
• Schematic / PCB Designing verification
• Ability to trace difficult problems using a variety of tools (debugger, JTAG emulator, logic analyzer, oscilloscope).
• Design, develop, code, test, and debug system software.

We are looking for Embedded software developers who will be responsible for designing, developing, optimizing, and implementing the software that is programmed into devices built around a processor/controllers. Candidates need to write code to solve problems and implement systems that make a physical hardware device work through software.

Thanks and Best Regards

Positions are open for PhDs/Master/Bachelors/Diploma candidates.

Role
As part of the role, the Developers / Senior Developers will be responsible for Design, Coding, and Integration while meeting the quality targets set for the project. The Tech Leads will be additionally responsible for Estimation, Architecture, Design, Technical Reviews, Customer Interaction, Building, and Mentoring a talented team of Engineers

Knowledge & Skills:

• Technical Experience on Physical Layer of 3GPP LTE
• Experience on DSP Development\
• Proficient in C Good
• understanding of Wireless Communications
• Experience on MAC-PHY interface
• Behavioral Interpersonal skills & Ability to work in team
• Good Communication Skills Good Analytical Skills

 
DSP, C, MAC-PHY, mentoring, 3gpp, coding, physical layer, LTE

Job Description Prescientech is looking for software enthusiast and developer with working experience of 2+ years with proven experience in complete development of software relating to Firmware & Operating System Development. The candidate must discover the requirement and need to code highly reliable software which turns the mission into reality and will be responsible for the major lifecycle of the software he/she creates, including development, testing, and coordination and maintenance. The candidate will be majorly responsible for all the aspects of the software development including operating system development, firmware debugging & assist application development. The candidate is expected to write code and should be familiar with working on Windows and Linux development environment. We are looking for an engineer who is technically sound and attacks every problem with enthusiasm to overcome hurdles. He should be a self-starter, team player, and have the hunger to venture into unknown areas and code and make the system work. Roles & Responsibility -Design Software architecture -Coding and implementation of firmware on hardware and testing -Hands-on hardware bring-up and system debugging -Code and Performance Optimization to meet the requirement -Understand the tasks at hand in full details -Quickly produce well-organized, optimized, and documented source code along with the team members -Debug existing source code and refine the feature set. -Work independently when required & Continuously learn and improve skills. -Maintaining the software systems once they are up and running -Perform review design and design modification Educational Qualifications and Work Experience -2+ years of experience in software development -Candidate should have Bachelors or Master’s Degree in Engineering in computer science or other related fields. -Ability to understand Datasheet -Debug tool knowledge (JTAG or other protocol) -Low-level programming expertise using C and assembler, with compiler/linker/debug experience. -Understanding of the Memory Map, Read/Write registers in Controllers Skills Required: -Strong knowledge of Java, C#, C++, Objective-C, or JavaScript programming languages. -Linux based operating system, Like Yocto/ Ubuntu -Understanding of microprocessor (ARM is appreciated) -IC and PCB knowledge (Clock pin, IO pin, Supply Voltage etc.) Preferable -Network TCP/IP protocol for advanced network connected devices -Excellent debugging and problem-solving skills. -Strong written and verbal communication skills -English language fluency -Prior Design Engineering experience (Preferred) -Strong Documentation skills for technical instruction manual for firmware operation